Static Route

Static routes are used to reach subnets that are not directly connected to or configured on the EnGenius Security Gateway, you can access this tab through Configure > Gateway > Interface > Static Route to add static routes to reach these subnets.

• Enabled: Whether the EnGenius Gateway should use the route or not. Disable this setting if you wish to temporarily remove a route from the EnGenius Gateway without manually recreating it later.

• Name: The name of the static route.

• Destination: Use this option to enter the remote subnet that is reached via this static route (in CIDR notation).

• Next-hop IP: IP address of the device (such as a router or layer 3 switches) that connects the EnGenius Gateway to the static route subnet.