• Update openssl to 1.1.1n
  • Support AD server with multi-group feature.
  • Optimize Wi-Fi reload time.
  • Support Wi-Fi Calling QoS.
  • Support 1000 myPSK rules per AP.
  • Resolved Fragattack vulnerability issues.


  • Adjust EAP-Enterprise rekey interval to avoid wireless IOT issues.


  • Fix hostapd daemon dead issue.
  • Add protection for hostapd zombie symptom.
  • Fix VLAN by RADIUS issue.


  • Enhance IOT client association compatibility.


  • Support RADIUS CoA disconnect-client requests (802.1x)
  • Support SmartTV SSID
  • LSP page encloses language support for Japanese language.


  • Support multiple domains of AD server.
  • Adjust DCS algorithm.
  • Recognize new iOS/MAC OS version.
  • Fixed captive portal for IPv6 issue.
  • Adjust log messages.
  • Fixed diag tool/Speed Test issue


  • Support DCS (Dynamic Channel Selection) by background scanning.
  • Enhance bcmc function that may block DHCP broadcast OFFER/ACK packets.
  • Support auto-channel with "Exclude DFS" config.
  • Support EnGenius cloud diagnostic mode.


  • Support system-reserved IP range pool.
  • Improve Wi-Fi performance while enabling app-detection.
  • Support RADIUS CoA disconnect-client requests.
  • Perform periodically scanning for 802.11k report without background scanning.
  • Support intelligent band-steering.
  • Support proxy ARP.
  • Support 802.1x/captive portal with Google Auth.
  • Support RADIUS WISPr traffic control and traffic quantity attributes.
  • Support RADIUS MAC-Auth in captive portal.
  • Support captive portal authentication by LDAP/AD server: single SSID, single server.
  • Support fail-safe image upgrade from cloud server.
  • Update 2.4GHz HT20 auto-channel algorithm for using 1,6,11 channels.


  • Resolved FragAttack vulnerability issues.


  • Add log message for Wi-Fi reload event.
  • Add protection to prevent Wi-Fi interface could not be brought up.
  • Update failsafe image for Dakota platform to accommodate management VLAN.
  • Optimize FW upgrade procedures on Dakota models.


  • Support Facebook Wi-Fi.
  • Add client's TX/RX Byte information in disassociation event log.
  • Modify LSP Page about HTTP/HTTPS proxy setting.
  • Handle HTTP error code 504 upon check-in to cloud server.


  • Handle private MAC address detection with blocked info messages.
  • Adjust mesh related syslog contents.
  • Support RSTP.
  • Support background scanning ON/OFF option.
  • Update certificate for HTTPS access to LSP page.


  • Handle larger max. client limit value from cloud server.
  • Fixed the issue that LED on/off would trigger network reload with specific configurations.


  • Support SSDP responder and adjust mDNS response content.


  • Band Steering feature encloses improvement for 802.11k/v and utilizes 802.11r fasting roaming technique to avoid re-authentication upon connection to different radio band.
  • Procedures of applying WLAN configuration has been optimized to shorten needed time for setting update.
  • Enhance Captive Portal secure login with HTTPS-based information exchange.
  • Support my-PSK with dynamic VLAN for WPA2-PSK authentication. (only available from EnGenius Cloud, not external radius)
  • Mesh AP node supports traffic shaping.
  • Support SNMP v2/v3 for local management with Get function.
  • Support multicast to unicast per radio.
  • Captive Portal feature supports client-leave-network timeout.
  • Support Client Balancing to steer the client to connect to best available AP.
  • Support Broadcast/Multicast suppression.


  • Adjust channel candidates of Auto-channel selection (ACS).
  • Adjust power table limitation of Malaysia and Indonesia.


  • Apply auto-channel selection mechanism update


  • Apply regulatory domain update


  • Improve throughput performance
  • Adjust DTIM from 2 to 3


  • Support Client Balancing
  • Support scheduling system reboot
  • Support L2-Isolation exception rules for VIP feature
  • Support radius NAS-id/port/addr attributes
  • Support software reset-to-default for mobile App
  • Captive portal supports redirurl parameter


  • Fixed the issue that AP may become unstable when some 2.4GHz-only WiFi clients try connecting to AP.
  • Fixed the issue that AP may hang up where the SSID profile included “hidden” and users downgrade firmware from v1.3.9 to v1.3.7


Resolve connectivity issue when SSID included space character.



  • Add log for blocking message clients.
  • Add log for the action of kicking clients.

Bug Fixes




  • Adjust client isolation behavior in NAT mode.
  • Support DNS settings per SSID.
  • Support wireless association banned message.
  • Support https redirect of captive portal.

Bug Fixes




  • Support L2 (MAC Address) client Block List per SSID.
  • Support advanced feature called Traffic Log to send more wireless client information to dedicated syslog server.
  • Improve auto-channel algorithm to avoid multiple AP choosing the same channel in certain situation.
  • Support advanced feature called presence reporting which makes the AP continuously gathering 802.11 probe request frames sent by wireless clients and then sending the data to specific 3rd party server.
  • Improve the efficiency of applying traffic shaping rules.
  • Support new Client Timeline feature.
  • Adjust default DHCP lease time of SSID in NAT mode to 5 minutes.

Bug Fixes

  • Fix the captive portal issue that triggered RADIUS accounting events before an user is authenticated.
  • Fix the issue that caused limited IP address allocation for a SSID running in NAT mode.
  • Fix the issue that caused long duration of captive portal splash page redirection.
  • Fix driver layer log mechanism to avoid unexpected wireless performance drop.



  • Improve the efficiency of SSID running in bridge mode.
  • TX Power tuning options now start from 1 to 10 dBm.
  • Adjust WMM/DSCP/802.1p mappings to follow conventions.
  • Support LED Blinking function to trigger an AP to blink its LED for 10 seconds. This could help user to quickly identify the AP.

Bug Fixes

  • Fix the issue that caused system to get wrong 2.4G channel utilization data in some special cases.



  • Support WPA3.
  • Support Mesh Auto Pairing.
  • Support the way to access LSP (local support page) with URL http://EnGenius.local and discover AP with Bonjour protocol.
  • Support the way to show system status with specific SSID name to ease the troubleshooting on device on-boarding.
  • NAT/Bridge mode now is configurable per SSID. They are supported only in Captive Portal in previous version.
  • Support the option to discard association requests from legacy 802.11a/b/g clients.
  • Enhance the efficiency to apply idle-timeout and session-timeout settings of Captive Portal.

Bug Fixes

  • Fix the issue that caused memory leak in a special case.



Bug Fixes

  • Fix captive portal IOT issues for certain wireless clients.
  • Fix the malfunction of EnGenius Radius authentication that caused by firmware upgrade.
  • Fix the issue that wireless LED did not blink normally in certain situation.
  • Fix the issue that the 2nd radius server doesn't work.
  • Fix the issue that DUT may fail to reload configurations during the system applying mesh.
Last modified 2h ago