• Support Policy Route.
  • Support Gateway Access Control: VIP List and Block List.
  • Support Firewall Traffic Log - syslog server.
  • Support Packet Capture for WAN interfaces.
  • Adjust the definition and behavior of "System Name" and "Device Name"
    • Remove System Name setting from LSP.
    • Revise DHCP client hostname to {ModelName}-{MAC_last_4_digits}.
    • System Name support multi-language.
  • Automatically add a GRE port forwarding rule while adding PPTP TCP port: 1723
  • Revise Subnet Mask format of Static IP in LSP.
  • Optimize reset button behavior.
  • Fixed Gateway status issue when it shows online, it doesn't show WAN1/WAN2 IP information in Cloud UI.
  • Fixed the issue for Auto VPN where it failed if the number of ESG devices is more than 11.
  • Fixed the issue where the system becomes stuck upon continuously adding two bridge interfaces without assigning any Ethernet ports.


  • Use System Name as Host name for WAN via DHCP.
  • Enhance WAN security to close port 53 if Outbound FQDN rules are set.
  • Fixed the issue for Site-to-Site VPN connection not established after system reloading in some cases.
  • Fixed the issue for SecuPoint server to let it work in Passthrough Mode or under NAT.
  • Fixed the issue for ESG620 not able to connect to EnGenius Cloud via WAN2 connection when an unsupported SFP+ module is plugged into WAN1 port.
  • Support URL filtering and Block page. (Cloud page to be updated)
  • Support EnGenius and 3rd-party DDNS function in Passthrough Mode. (Cloud page to be updated)
  • Support Client traffic statistics. (Cloud page to be updated)


  • This f/w version is for the first release.
Last modified 3d ago