IPv4 ACE
Use this page to view and add rules to IPv4-based ACLs.
ACL Name | Select the ACL from the list for which a rule is being created. |
Sequence | Enter the sequence number which signifies the order of the specified ACL relative to other ACLs assigned to the selected interface. The valid range is from 1 to 2147483647, 1 being processed first. |
Action | Select what action to take if a packet matches the criteria. Permit: Forwards packets that meet the ACL criteria. Deny: Drops packets that meet the ACL criteria. |
Protocol | Select Any, Protocol ID, or Select from a List in the drop-down menu. Any: Check Any to use any protocol. Protocol ID: Enter the protocol in the ACE to which the packet is matched. Select from List: Selects the protocol from the list in the provided field.
|
Source IP Address Value | Enter the source IP address. |
Source IP Mask | Enter the mask of the new source IP address. |
Destination IP Address Value | Enter the destination IP address. |
Destination IP Mask | Enter the mask of the new source IP address. |
Type of Service | Select Any or DSCP to match from drop-down list. When DSCP to match is selected, enter the DSCP. The range is from 0 to 63. |
ICMP Type | Select Any, Protocol ID, or Select from List from drop-down menu. Protocol ID: Enter the protocol in the ACE to which the packet is matched. The range is from 0 to 255. Select from List: Select the ICMP from the list in the provided field. |
ICMP Code | Select Any or User Defined from drop-down menu. When User Defined is selected, enter the ICMP code value. The range is from 0 to 255. |
Click Apply to update the system settings.
Last updated