Use your client device (e.g., a laptop, mobile device, or tablet) to find the SSID: “EnMGMTxxxx” (xxxx is the last four digits of the MAC address, found on the back of the device) and connect to it.
Under your web browser, enter the URL http://EnGenius.local or the localhost IP address (192.168.1.1) to access the device’s user interface. You can review device status after logging into the AP with the default admin account/password (default account & password: admin/admin)
By default, EnGenius cloud access points (ECW series) are assigned an IP address dynamically by the DHCP server. If you encounter issues with IP address assignment, please double check that the IP settings include IP address, subnet mask, gateway, proxy, and management VLAN. If any issues still exist, you may change your IP assignment from "DHCP mode" to "Static IP" via the following procedure:
Every device's status page includes useful information about the status of the device, basic configuration options (such as setting a static IP), and other tools. The following section will explain the items available on the device status page.
ECW Access Points provide the following information and configuration options on their local status page:
Contains information regarding the device overview, EnGenius Cloud overview, and network connectivity information.
Provides information regarding the name, model, serial number, IP address, MAC address, and current firmware.
Provides information about the Cloud registration status, date of registration, and time of last update.
Provides connectivity information to local network, Internet, and EnGenius Cloud.
Provides settings for IPv4 / IPv6 address, management VLAN, firmware upgrade, and other miscellaneous configuration items (such as HTTP/HTTPS Proxy). Users can also reboot the device or reset the device to factory default settings from here.