LogoLogo
  • FitController User Manual
  • Product Overview
    • Introduction
    • LED Behavior
    • Technical Specification
  • Getting Started
    • Power on Device
    • Logging On
    • Registering Devices to Organization
    • Assigning Devices to Network
    • Device Pairing
  • FitController (VM)
    • Platform Requirements (VM)
    • Software Packages (VM)
  • Working with Organization Trees
    • Hierarchy View
    • Network
  • Managing Devices
    • Managing Access Points
      • Configure and Check AP Details
    • Managing Switches
      • PoE scheduling
      • Getting Switch Analytics
      • Mirror
      • Link Aggregation
    • Managing Clients
    • Topology
  • Configuring Networks
    • Configuring SSIDs
      • 802.11 Settings
      • Configuring Security
      • Client IP Addressing
      • Dynamic VLAN Pooling
      • Advanced Settings
      • QoS
      • Captive Portal
      • Social Login
      • Voucher Service
      • Configuring Splash Page
      • Access control
    • Configuring Radio
    • Configuring VLAN
    • Configuring Switch Settings
    • Firmware Upgrade
    • General Settings
    • Access Control
  • Analytics
    • Device Events
    • System Events
    • Config Logs
  • Managing Organizations
    • Managing Device Inventory
    • Email Alerts
  • Managing Team Members
    • Roles and Permissions
  • Notification & Alerts
    • Notification Center
    • Configuring Alert Settings
  • Appendix
    • Compliance
    • Declaration of Conformity
    • Disclaimer/ Note
Powered by GitBook
On this page
  • Access Point Alerts
  • Switch Alerts
  1. Notification & Alerts

Configuring Alert Settings

PreviousNotification CenterNextAppendix

Last updated 2 years ago

There are a number of options available for email alerts to be sent when certain network or device events occur.

Alerts can be configured under Configure > Alerts.

Access Point Alerts

Alerts can be configured for the following access point events:

  • AP(s) go offline for XX minutes: sends an email if one or more access points go offline for a preset (from drop-down list) amount of time.

  • Event with severity XXXX and above occurs: sends an email if event severity meeting a minimum severity threshold occurs.

  • Configuration changed within network: sends an email if SSID, radio settings, firmware upgrade, or individual device settings override the default settings.

Switch Alerts

Alerts can be configured for the following switch events:

  • Switch(es) go offline for XX minutes: sends an email if one or more switches go offline for a preset (from drop-down list) amount of time.

  • Event with severity XXXX and above occurs: sends an email if event severity meeting a minimum severity threshold occurs.

  • Configuration changed within network: sends an email if firmware upgrades or individual device settings override the default settings.

  • Switch port link status change: sends an email when device port link status is changed.

  • Switch STP Port status change: sends an email when device port STP status is changed.

  • Switch LBD Port status change: sends an email when device LBD status is changed.