General Settings
Last updated
Last updated
General settings allow you to configure Network settings, AP network-wide settings and so do Switches. Click Configure > General Setting to access this screen.
Network name, country, and timezone can be edited as needed. Follow the steps below to edit a network.
Click edit button to change network name
Select Country, Timezone, and then click Apply
This feature allows you to configure the login account of local web GUI for devices. The settings here apply to all APs and Switches in this Network .
Note that username and password could be blank if you don't want to change device login account of local web GUI.
This allows you to enable all AP's LED lights in the current network.
This settings can let users remotely log Syslog events from a managed AP device to your external logging server.
You can enable and configure the logging feature from Configure → General setting→ Syslog server.
Status: Enable to open the function to the remote system log.
Log server address: Specify the IP address or hostname of the Syslog server.
Log server port: Specify the port of the Syslog server. The default port is 514.
Clients can be blocked from accessing the network. When these clients attempt to connect to the network and open a web browser, they will be redirected to a blocked message. The Network-wide Default block message is configured on a per-network basis. The message is set in the Network-wide > General Settings > AP page.
The blocked splash page below will be presented below to the blocked clients.
For applications like CRM tools, presence analytics, or location-aware services which need to continuously gather presence data of wireless clients, EnGenius Acess Points are capable of delivering real-time presence data to fulfill the requirement.
EnGenius Presence Service can have managed APs continuously gathering 802.11 probe request frames sent by wireless clients and then sending the data to 3rd party servers configured in FitController.
In FitController, the configuration of presence service is at
General Settings > AP > Advanced Settings
the following parameters can be configured on the page:
Parameters
Description
Server Location
3rd party server address
Key
Secret used to generate a SHA256 HMAC signature, over the payload (the JSON message). The signature is then added to a custom HTTP header (“Signature”) in the POST message.
Interval
The Interval between two consecutive messages has been sent.
Traffic log feeds wireless client info to remote Syslog server. Note that enabling this setting will severely degrade AP performance. To enable this function, the syslog server must be enabled.
This allows you to enable all switches' LED lights in the current network.
This settings can let users remotely log Syslog events from a managed switch device to your external logging server.
You can enable and configure the logging feature from Configure → General setting→ Syslog server.
Status: Enable to open the function to the remote system log.
Log server address: Specify the IP address or hostname of the Syslog server.
Log server port: Specify the port of the Syslog server. The default port is 514.
