LogoLogo
  • FitController User Manual
  • Product Overview
    • Introduction
    • LED Behavior
    • Technical Specification
  • Getting Started
    • Power on Device
    • Logging On
    • Registering Devices to Organization
    • Assigning Devices to Network
    • Device Pairing
  • FitController (VM)
    • Platform Requirements (VM)
    • Software Packages (VM)
  • Working with Organization Trees
    • Hierarchy View
    • Network
  • Managing Devices
    • Managing Access Points
      • Configure and Check AP Details
    • Managing Switches
      • PoE scheduling
      • Getting Switch Analytics
      • Mirror
      • Link Aggregation
    • Managing Clients
    • Topology
  • Configuring Networks
    • Configuring SSIDs
      • 802.11 Settings
      • Configuring Security
      • Client IP Addressing
      • Dynamic VLAN Pooling
      • Advanced Settings
      • QoS
      • Captive Portal
      • Social Login
      • Voucher Service
      • Configuring Splash Page
      • Access control
    • Configuring Radio
    • Configuring VLAN
    • Configuring Switch Settings
    • Firmware Upgrade
    • General Settings
    • Access Control
  • Analytics
    • Device Events
    • System Events
    • Config Logs
  • Managing Organizations
    • Managing Device Inventory
    • Email Alerts
  • Managing Team Members
    • Roles and Permissions
  • Notification & Alerts
    • Notification Center
    • Configuring Alert Settings
  • Appendix
    • Compliance
    • Declaration of Conformity
    • Disclaimer/ Note
Powered by GitBook
On this page
  • Automatic Upgrades
  • Manual Upgrade
  1. Configuring Networks

Firmware Upgrade

PreviousConfiguring Switch SettingsNextGeneral Settings

Last updated 2 years ago

Automatic Upgrades

EnGenius FitController enables automatic upgrades by default and will upgrade firmware according to the Maintenance Window time period each week.

Manual Upgrade

To manually update device firmware:

  1. Select the firmware you desire to upgrade (or press upload to add the firmware file to the list for selection).

  2. Click Upgrade Now (If you have the devices in the New Firmware Trial Zone, you will only upgrade the Firmware on these devices. )

3. Click Apply.