LogoLogo
  • FitController User Manual
  • Product Overview
    • Introduction
    • LED Behavior
    • Technical Specification
  • Getting Started
    • Power on Device
    • Logging On
    • Registering Devices to Organization
    • Assigning Devices to Network
    • Device Pairing
  • FitController (VM)
    • Platform Requirements (VM)
    • Software Packages (VM)
  • Working with Organization Trees
    • Hierarchy View
    • Network
  • Managing Devices
    • Managing Access Points
      • Configure and Check AP Details
    • Managing Switches
      • PoE scheduling
      • Getting Switch Analytics
      • Mirror
      • Link Aggregation
    • Managing Clients
    • Topology
  • Configuring Networks
    • Configuring SSIDs
      • 802.11 Settings
      • Configuring Security
      • Client IP Addressing
      • Dynamic VLAN Pooling
      • Advanced Settings
      • QoS
      • Captive Portal
      • Social Login
      • Voucher Service
      • Configuring Splash Page
      • Access control
    • Configuring Radio
    • Configuring VLAN
    • Configuring Switch Settings
    • Firmware Upgrade
    • General Settings
    • Access Control
  • Analytics
    • Device Events
    • System Events
    • Config Logs
  • Managing Organizations
    • Managing Device Inventory
    • Email Alerts
  • Managing Team Members
    • Roles and Permissions
  • Notification & Alerts
    • Notification Center
    • Configuring Alert Settings
  • Appendix
    • Compliance
    • Declaration of Conformity
    • Disclaimer/ Note
Powered by GitBook
On this page
  • How to configure
  • Port state
  1. Managing Devices
  2. Managing Switches

Mirror

PreviousGetting Switch AnalyticsNextLink Aggregation

Last updated 2 years ago

Port Mirroring allows you to copy packets on one or more ports to a mirroring destination port. You can attach a monitoring device to the mirroring destination port to view details about the packets passing through the copied ports. This is useful for network monitoring and troubleshooting purposes. The feature is available is at Manage > Switch < Details > Mirror

The following describe the labels on this screen :

Session id : A number identifying the mirror session. Switch supports up to 3 mirror sessions.

Session State : Select whether to enable or disable port mirroring.

Destination Port : The port which all mirrored data is sent to .

Ingress : indicates that only data being received will be mirrored.

Egress : indicates that only data being sent will be mirrored

How to configure

  1. Click the edit icon towards the right .

  2. Enable the Session state.

  3. Select the Destination port

  4. Select the Ingress and Egress port

  5. Click Apply

Port state

There are four types of port that you configured .

Port was assigned to a destination port . Port was assigned only data being sent will be mirrored . Port was assigned only data being received will be mirrored . Port was assigned both directions of data are being mirrored to the destination port.