ECW160

v1.3.36

  • Support multiple domains of AD server.
  • Adjust DCS algorithm.
  • Recognize new iOS/MAC OS version.
  • Fixed captive portal for IPv6 issue.
  • Adjust log messages.
  • Fixed diag tool/Speed Test issue

v1.3.35

  • Support DCS (Dynamic Channel Selection) by background scanning.
  • Enhance bcmc function that may block DHCP broadcast OFFER/ACK packets.
  • Support auto-channel with "Exclude DFS" config.
  • Support EnGenius cloud diagnostic mode.

v1.3.30

  • Support system-reserved IP range pool.
  • Improve Wi-Fi performance while enabling app-detection.
  • Support RADIUS CoA disconnect-client requests.
  • Perform periodically scanning for 802.11k report without background scanning.
  • Support intelligent band-steering.
  • Support proxy ARP.
  • Support 802.1x/captive portal with Google Auth.
  • Support RADIUS WISPr traffic control and traffic quantity attributes.
  • Support RADIUS MAC-Auth in captive portal.
  • Support captive portal authentication by LDAP/AD server: single SSID, single server.
  • Support fail-safe image upgrade from cloud server.
  • Update 2.4GHz HT20 auto-channel algorithm for using 1,6,11 channels.

v1.3.28

  • Resolved FragAttack vulnerability issues.

v1.3.27

  • Add log message for Wi-Fi reload event.
  • Add protection to prevent Wi-Fi interface could not be brought up.
  • Update failsafe image for Dakota platform to accommodate management VLAN.
  • Optimize FW upgrade procedures on Dakota models.

v1.3.26

  • Support Facebook Wi-Fi.
  • Add client's TX/RX Byte information in disassociation event log.
  • Modify LSP Page about HTTP/HTTPS proxy setting.
  • Handle HTTP error code 504 upon check-in to cloud server.

v1.3.25

  • Handle private MAC address detection with blocked info messages.
  • Adjust mesh related syslog contents.
  • Support RSTP.
  • Support background scanning ON/OFF option.

v1.3.23

  • Handle larger max. client limit value from cloud server.
  • Fixed the issue that LED on/off would trigger network reload with specific configurations.

v1.3.22

  • Support SSDP responder and adjust mDNS response content.

v1.3.21

  • Band Steering feature encloses improvement for 802.11k/v and utilizes 802.11r fasting roaming technique to avoid re-authentication upon connection to different radio band.
  • Procedures of applying WLAN configuration has been optimized to shorten needed time for setting update.
  • Enhance Captive Portal secure login with HTTPS-based information exchange.
  • Support my-PSK with dynamic VLAN for WPA2-PSK authentication. (only available from EnGenius Cloud, not external radius)
  • Mesh AP node supports traffic shaping.
  • Support SNMP v2/v3 for local management with Get function.
  • Support multicast to unicast per radio.
  • Captive Portal feature supports client-leave-network timeout.
  • Support Client Balancing to steer the client to connect to best available AP.
  • Support Broadcast/Multicast suppression.

v1.3.15

  • Adjust channel candidates of Auto-channel selection (ACS).
  • Adjust power table limitation of Malaysia and Indonesia.

v1.3.14

  • Apply auto-channel selection mechanism update

v1.3.12

  • Apply regulatory domain update

v1.3.11

  • Improve throughput performance
  • Adjust DTIM from 2 to 3

v1.3.10

  • Support Client Balancing
  • Support scheduling system reboot
  • Support L2-Isolation exception rules for VIP feature
  • Support radius NAS-id/port/addr attributes
  • Support software reset-to-default for mobile App
  • Captive portal supports redirurl parameter

v1.3.8

  • Fixed the issue that AP may become unstable when some 2.4GHz-only WiFi clients try connecting to AP.
  • Fixed the issue that AP may hang up where the SSID profile included “hidden” and users downgrade firmware from v1.3.9 to v1.3.7

v1.3.7

Resolve connectivity issue when SSID included space character.

v1.3.6

Improvements

  • Add log for blocking message clients.
  • Add log for the action of kicking clients.

Bug Fixes

N/A

v1.3.5

Improvements

  • Adjust client isolation behavior in NAT mode.
  • Support DNS settings per SSID.
  • Support wireless association banned message.
  • Support https redirect of captive portal.

Bug Fixes

N/A

v1.3.4

Improvements

  • Support L2 (MAC Address) client Block List per SSID.
  • Support advanced feature called Traffic Log to send more wireless client information to dedicated syslog server.
  • Improve auto-channel algorithm to avoid multiple AP choosing the same channel in certain situation.
  • Support advanced feature called presence reporting which makes the AP continuously gathering 802.11 probe request frames sent by wireless clients and then sending the data to specific 3rd party server.
  • Improve the efficiency of applying traffic shaping rules.
  • Support new Client Timeline feature.
  • Adjust default DHCP lease time of SSID in NAT mode to 5 minutes.

Bug Fixes

  • Fix the captive portal issue that triggered RADIUS accounting events before an user is authenticated.
  • Fix the issue that caused limited IP address allocation for a SSID running in NAT mode.
  • Fix the issue that caused long duration of captive portal splash page redirection.
  • Fix driver layer log mechanism to avoid unexpected wireless performance drop.

v1.3.2

Improvements

  • Improve the efficiency of SSID running in bridge mode.
  • TX Power tuning options now start from 1 to 10 dBm.
  • Adjust WMM/DSCP/802.1p mappings to follow conventions.
  • Support LED Blinking function to trigger an AP to blink its LED for 10 seconds. This could help user to quickly identify the AP.

Bug Fixes

  • Fix the issue that caused system to get wrong 2.4G channel utilization data in some special cases.

v1.2.18

Improvements

  • Support WPA3.
  • Support Mesh Auto Pairing.
  • Support the way to access LSP (local support page) with URL http://EnGenius.local and discover AP with Bonjour protocol.
  • Support the way to show system status with specific SSID name to ease the troubleshooting on device on-boarding.
  • NAT/Bridge mode now is configurable per SSID. They are supported only in Captive Portal in previous version.
  • Support the option to discard association requests from legacy 802.11a/b/g clients.
  • Enhance the efficiency to apply idle-timeout and session-timeout settings of Captive Portal.

Bug Fixes

  • Fix the issue that caused memory leak in a special case.

v1.2.15

Improvements

Bug Fixes

  • Fix captive portal IOT issues for certain wireless clients.
  • Fix the malfunction of EnGenius Radius authentication that caused by firmware upgrade.
  • Fix the issue that wireless LED did not blink normally in certain situation.
  • Fix the issue that the 2nd radius server doesn't work.
  • Fix the issue that DUT may fail to reload configurations during the system applying mesh.
Last modified 15d ago