Cloud Management - FitXpress

Configure with EnGenius FitXpress

Step 1: Connecting to Ethernet

Connect the Ethernet cable from the EnGenius Switch Extender directly to the DHCP-enabled network and make sure the switch can reach the Internet.

Step 2: Register Device

You can register the switch with the FitXpress app.

1. Open the FitXpress mobile app and create an account.

2. Log in and go to the Devices section. Click the Add(+) button.

3. Scan the QR code on the back of the device via the app.

*The display model number may be varied according to different models.

Step 3: Connect to the FitXpress

Once the device is powered on and ready to connect to the Internet, the PWR LED will stay Solid On, which means the device is now connected to the FitXpress platform. It will automatically download the default configuration settings from FitXpress for automated provisioning.

When the switch is connected to the FitXpress platform for the first time, it will automatically check the latest available firmware. If the firmware upgrade is required, it might take 8~10 minutes to complete the process

Step 4: Manage with FitXpress

Log in to the FitXpress app to configure detailed settings and monitor your devices.

*The display model number may be varied according to different models.

Change the Management Plane

If you want to manage your device through another cloud mmanagement, please unregister your Switch Extender device on FitXpress first. Then, register the device on Cloud To-Go. You can follow the steps below to deregister a device.

• Navigate to the device page.

• Select your Switch Extender device on Switch Extender page.

• Click "Delete Device" to delete Switch Extender on device page.

• Press the reset button for 10 seconds to return the device to its default settings.

• Follow the Cloud Management - Cloud To-Go instructions to register the Switch Extender.