EWS377-FIT

EnGenius FIT Wi-Fi 6 4x4 Dual-band Indoor Access Point

v1.1.62

[Issue Fixed]

  • Fix command injection vulnerability in tools page of local GUI.

  • Resolve the issue where mDNS forwarding is not working properly.

  • Fix the vulnerability issue specified in CVE-2024-9504.

v1.1.61

[Issue Fixed]

  • Resolve the issue where clients that only support 2.4G are unable to obtain IP address or access internet through Access Point (AP).

v1.1.60

[Issue Fixed]

  • Enhance Client Roaming behavior to support the EnGenius Fast-Handover algorithm, preventing 'Sticky Clients' from connecting to AP with weak signal, ensuring smooth transitions and optimal connections.

  • Enhance Client-Balancing Features to support 802.11v by adjusting client connections based on load and signal quality, dispersing client connections, and preventing AP overload.

  • Enhance the SSID traffic management mechanism to ensure client maintain optimal throughput when traffic shaping is enabled.

v1.0.50

  • Support wireless client mac-based WMM

  • Traffic log includes NAT information when logged to the syslog server.

  • Prevent DNS resolved fail.

  • Support application DSCP tagging.

  • Fix Command Injection Vulnerabilities.

v1.0.40

  • Supports multiple languages of system name in LSP.

  • Update the style of the LSP/Standalone web GUI.

  • Fingerprint supports more OS types.

  • Fixed AP offline caused by UTF8 decode of device name.

  • Fixed the certificates sometimes disappear after device firmware upgrade.

  • Supports website filtering.

  • Supports PSTI certification requirements.

v1.0.30

  • Fixed Fit AP sometimes not displaying Wi-Fi usage information in FitXpress.

  • Fixed Fit AP sometimes appearing offline in FitXpress.

  • Fixed an issue where enabling WDS in station mode would cause VLAN passthrough to fail.

  • Fixed an issue where the MAC filter white list does not working in standalone mode.

  • Fixed the issue where the web GUI turned into LSP and devices couldn't be found in 'Inventory -> Pending Approval' after upgrading the firmware from v1.0.1 in standalone mode.

v1.0.22

  • Fixed captive portal splash page redirect issue when managed by Fit controller.

  • Resolved AP offline issue with Fit controller after firmware upgrade from v1.0.4.

  • Remove email alert: "ezmcloud configuration change notification" in standalone mode.

v1.0.21

  • Support MAP LED behavior at MAP listen mode.

  • Change minimum TX power to 7 in standalone mode.

v1.0.20

  • Support Repeater function in standalone mode only.

  • Support “Isolate Ethernet Devices” advanced setting for guest network in standalone mode only.

v1.0.10

  • Support FitRegister service.

v1.0.4

  • Fixed the AP can not re-connect to FitCon server after network down/up.

PreviousEWS357-FITNextEWS276-FIT

Last updated