ECS5512F/ECS5512FP/ECS5512
v2.2.18
Fixed OSPFv3 Area Setting page display error. (Configure → L3 Protocols → OSPFv3 → Area Settings)
Fixed CPU loading issue upon parsing DHCP traffics for wired client information.
v2.2.15 (Obsolete, replaced by v2.2.18)
Add CLI command for wired client-list function: wired client list { enable | disable }
Modify DHCP packet's host name (Option 12) to include model name and add 4 MAC address digits (2-bytes).
Change default configurations:
DHCP snooping is disabled by default.
Wired client list is enabled by default.
Add CLI command to support config VLAN range.
Implement CLI commands that can show current config of specified feature.
Add CLI commands to support displaying 5-min port utilization records for past 24 hours.
Add CLI command to support showing different running config.
Modify the LLDP-MED TLV value content when connecting to Senao Extender.
Support manually disable / enable cloud agent by CLI and Local GUI.
Change default config to disable IPv6 default route.
Enhance Cloud agent to support 802.1x+MAB feature.
Change STP default config from MSTP to RSTP.
v2.2.6
Integrate ACLG (Auto-CAM life-guard) into the PDLG.
Add ONVIF discovery feature.
Change the jumbo frame size to 12KB.
Support VTP (VLAN trunking port) for 1 ~ 4094 VLAN ID.
Enclose system name for displaying in syslog messages.
Support system name using UTF-8.
Support port isolation and grouping (Please be advised the isolation settings will need re-configuration due to feature update where forward ports can be specified for a chosen port when port isolation is enabled).
v2.2.2
Support MDNS and SSDP discovery protocols.
Support LBD function per port setting.
Add Private-VLAN function. (via CLI and local GUI for now)
Support LSP function.
Fine-tune the ping delay time issue.
Fine-tune the abnormal last update time issue for cloud_agent.
Support Gratuitous ARP function.
Support single port binding to trunking member via local GUI.
v2.2.1
Add RIP/OSPF feature.
Add RIPng/OSPFv3 feature.
Enclose config update:
IPv4:
Maximum ARP (Host Route) : 2048
Maximum Static Route : 256
Maximum Dynamic + Static Route : 1024
IPv6:
Maximum Neighbor (Host Route) : 1024
Maximum Static Route : 128
Maximum Dynamic + Static Route : 512
Add IPv4 multiple interface configurations for cloud agent.
Add RIP/OSPF configurations for cloud agent.
Add IPv4 routing table for cloud agent.
Add IPv4 static route configurations for cloud agent.
Enhance multiple interface & address for L3-series. (IPv4 address: 4 → 16, IPv6 address: 20 → 32)
Enhance Cloud Agent to support MAF. (MAC address filtering)
Known Issue: in [MLD Snooping][Router Settings], when adding a port into static port list, the port will show as "T", instead of "S".
Known Issue: in [Web][Port Settings], Fiber ports will stop working after setting 1Gbps/Full from web then changing to other speed; this can be recovered by disabling/enabling the port.
Fix abnormal gateway configuration in the DHCP relay environment.
Fix abnormal LLDP TLV format for SFP port.
Fixed the issue of VLAN name synchronization when the VLAN name contains special characters such as parentheses (e.g., '()').
Add BPDU Guard / Root Guard for STP protocol feature.
Add SNMPv3 configurations for cloud agent.
Add MVR feature.
Enclose fix for CVE-related issue (no_dirlist).
Support multiple Regions (including Japan).
Revise system name to be “Model Name” followed by “-“ with last 4 digits of device MAC address (for example, ECS5512-38f8).
Support web proxy server feature in local GUI for cloud agent.
Enhance switch sync mechanism with cloud and cloud check-in time.
Enclose fix to prevent switch hang upon configuring static IPv4 address to switch device.
Modify the action when schedule.db changes for scheduled PoE feature.
Modify the log handling with Cloud about flick reboot.
Fix switch hang issue with IGMP and MLD for IPTV integration.
Fix potential segmentation fault issue for the routing feature.
v1.2.68
This version is for the first release.
Last updated