Hereby, EnGenius Networks declare that this product is in compliance with:

• Directive 2014/53/EU

• Regulations 2017 (S.I. 2017/1206)/ Regulations 2016 (S.I. 2016/1091)/ Regulations 2016 (S.I. 2016/1101)

• RoHS 2015/863

• WEEE 2022

• REACH Regulation

The EnGenius Product Security Team is tasked with researching, analyzing, and responding to security incident reports about EnGenius products. This team serves as the initial point of contact for all security incident reports and collaborates directly with EnGenius customers, security researchers, government agencies, consultants, industry security organizations, and other vendors to detect security issues with EnGenius products. Moreover, the team is responsible for issuing security advisories and communicating with external entities regarding measures to mitigate specific security issues encountered with EnGenius products. Please visit https://docs.engenius.ai/esp for more detailed information.

EnGenius refrains from disclosing details of a vulnerability that could be utilized to create an exploit. To report a security vulnerability, please contact psirt@engenius.ai.

• Maximum data rates are based on the IEEE standards. Actual throughput and range may vary depending on many factors including environmental conditions, the distance between devices, radio interference in the operating environment, and the mix of devices in the network.

• Features and specifications are subject to change without notice.

• This device complies with Part 15 of the FCC Rules.

• Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

• Trademarks and registered trademarks are the property of their respective owners. For the United States of America: Copyright © 2023 EnGenius Technologies, Inc. All rights reserved.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

(If device is outdoor AP, please delete it. If device is indoor AP, need to add it.)

This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.

For mobile device usage (>20cm/low power)

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

CE

The device complies with Directive 2014/53/EU issued by the Commission of the European Community.

Standards:

• ETSI EN 300 328 V2.2.2 (2019-07)

• ETSI EN 301 893 V2.1.1 (2017-05) Final Draft

• ETSI EN 303 687 V0.0.20 (2022-03)

• EN 55032:2015+A1:2020 EN 55035:2017/A11:2020 ETSI

• EN 301489-1 V2.2.3 (2019-11)

• ETSI EN 301 489-17 V3.2.4 (2020-09)

• EN 62368-1:2014+A11: 2017

• EN 62311: 2020

UKCA

The device is in conformity with the relevant legislation of United Kingdom: 2017 (S.I. 2017/1206)/ Regulations 2016 (S.I. 2016/1091)/ Regulations 2016 (S.I. 2016/1101).

Standards:

• EN 300 328 V2.2.2 (2019-07)

• EN 301 893 V2.1.1 (2017-05) Final Draft

• EN 303 687 V0.0.20 (2022-03)

• EN 55032:2015+A1:2020

• EN 55035:2017/A11:2020

• EN 301489-1 V2.2.3 (2019-11)

• EN 301 489-17 V3.2.4 (2020-09)

• EN 62368-1:2014+A11: 2017

• EN 62311: 2020

• IR 2030

IC

This device complies with ISED’s license-exempt RSS. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution :

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

(iv) where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated.

Introduction

This Quick Start Guide is designed to guide you through the installation of the Cloud6 2x2 Wallplate Access Point, model ECW215, including hardware mounting and configuration.

Package Contents

System Requirements

The EnGenius Cloud is primarily accessible with a web browser or mobile app. Before signing up for the EnGenius Cloud Service or logging on to the EnGenius Cloud Platform to manage your network, ensure that you've downloaded the right app and used the supported browser.

Mobile App:

EnGenius Cloud To-Go (iOS/ Android supported)

Web Browser:

• Google Chrome (57.0.2987.110 and later)

• Microsoft Edge (80.0.361.103 and later)

• Mozilla Firefox (52.0 and later)

Network Requirements

Before you get started, please make sure your network environment is DHCP-enabled. EnGenius Cloud Access Points (ECW series) are default assigned an IP address dynamically by the DHCP server.

Hardware Overview

Ports

LEDs

Hardware Mounting

The access point is designed for wall-mounting and can be deployed in three ways:

• Attaching to a junction box

• Attaching to a Wall with anchors

• Attaching to a wall without anchors

Please perform the steps for the appropriate installation:

Attaching to a Junction Box

1. Remove the cover plate of your junction box.

2. Align the Short Junction Plate to the junction box and use the original junction box cover screws to fasten the Short Junction Plate to the box.

3. Attach the Access Point to the Short Junction Plate.

Attaching to A Wall with Anchors

1. Mark the locations of the two mounting holes on the wall surface.

2. Drill two holes with 6.5mm diameter and 35mm depth on the marks.

3. Insert the Anchors into the drilling holes until they are flush with the wall.

4. Align the Tall Junction Plate over the drilling holes and then tighten the screws into the Anchors.

5. Fasten the Access Points to the Tall Junction Plate.

Attaching to A Wall without Anchors

1. Mark the locations of the two mounting holes on the wall surface.

2. Align the Tall Junction Plate over the drilling holes and then tighten the screws into the holes.

3. Fasten the Access Points to the Tall Junction Plate.

Configure with EnGenius Cloud

Step1: Register Device and Assign to Network

You can register the device either by Cloud To-Go mobile app or the EnGenius Cloud platform.

Cloud To-Go Mobile App

1. Open and log in to the EnGenius Cloud To-Go mobile app.

2. Scan the QR code on the back of the device via the app.

3. If the camera successfully scans a QR code, the app will display the device Information. You could tap "Register" to complete the Registration.

4. Registered devices will be shown on the Inventory&License page. Slide left the device and click "Add to Network" add the device to your personalized Network.

EnGenius Cloud Platform

1. Log in to the EnGenius Cloud Platform: https://cloud.engenius.ai/.

2. Go to the home > Inventory&License page and click "Register Device".

3. Enter the Serial Number of the device(s) for device registration. Please refer to "User Manual-Registering Devices to Organization".

4. Select the registered device and click "Assign to Network" to add the device to your personalized Network.

Step2: Power On Device

The EnGenius Cloud AP devices can be powered by any of the following:

• EnGenius Cloud PoE Switch or 802.3af/ 802.3at PoE+ compliant Switch

• EnGenius PoE adaptor

• Power Adapter (DC 12V power input)

Connecting to a PoE Switch

Connect the Ethernet cable from the EnGenius Cloud AP directly to the PoE port of the PoE switch.

Powered with a PoE Adapter

(A) Connect one end of the Ethernet cable into the LAN (PoE) port of EnGenius AP and the other end to the PoE port on the PoE Adapter.

(B) Connect the power cord with the PoE Adapter and plug the other end into an electrical outlet. (C) Connect the second Ethernet cable into the LAN port of the PoE Adapter and the other end to the Ethernet port on the computer.

Powered with a Power Adapter

Connect the Power Cord to the adapter, and then plug the Power Cord into the power outlet.

Step3: Connect to the EnGenius Cloud

Once the device is powered on and ready to connect to the Internet, the LED indicator will stay Solid On, which means the device is now connected to the EnGenius Cloud Platform. It will automatically download the default configuration settings from EnGenius Cloud for automated provisioning.

Step4: Manage with the EnGenius Cloud

Log in to the EnGenius Cloud platform to configure detailed settings. For more information, please refer to User Manual.

Troubleshooting

If your AP cannot be managed by the EnGenius Cloud Platform, there might be a problem with connecting to EnGenius Cloud.

To troubleshoot the connection issue, you may log in to the Device Local Access page:

1. Use your client device (e.g., a laptop, mobile device, or tablet) to find the SSID: "EnMGMTxxxx" (xxxx is the last four digits of MAC - MAC would be found on the back of the device) and connect to it.

2. Under your web browser, enter the URL: http://EnGenius.local or http://192.168.1.1 to access the device's user interface.

3. You can review the device status after logging into the AP with the default admin account/password (admin/admin).

4. Check the information on Network Connectivity and take action if necessary.

For more details, please refer to the "User Manual-Troubleshooting ECW AP".