Option A: Cloud Management

Configure with EnGenius Cloud

Step 1: Connecting to Ethernet

Connect the Ethernet cable from the EnGenius Switch directly to the DHCP-enabled network and make sure the PDU can reach the Internet.

Step2: Register Device

You can register the device either by Cloud To-Go mobile app or the EnGenius Cloud platform.

Cloud To-Go Mobile App

  1. Open and log in to the EnGenius Cloud To-Go mobile app.

  2. Scan the QR code on the back of the device via the app.

3. If the camera successfully scans a QR code, the app will display the Device Information. You could tap "Register" to complete the Registration.

4. Registered devices will be shown on the Inventory & License page. Upon sliding left the device, you can click "Add to Network" to add the device to your designated Network.

Network: Management domain shared same configurations within EnGenius Cloud.

EnGenius Cloud Platform

  1. Log into the EnGenius Cloud Platform: https://cloud.engenius.ai/.

  2. Go to the home > Inventory page and click "Register Device".

  3. Enter the Serial Number of the device(s) for device registration. Please refer to "User Manual-Registering Devices to Organization".

4. Select the registered device and click "Assign to Network" to add the device to your designated Network.

Network: Management domain shared same configurations within EnGenius Cloud.

Troubleshooting

If your Gateway device cannot be managed by the EnGenius Cloud Platform, there might be a problem with connecting to EnGenius Cloud.

To troubleshoot the connection issue, you may log in to the PDU Local Web (optionB)page:

  1. Make sure that your host system has same layer-2 network as the PUD. By default, the computer should get the IP address in this segment 192.168.10.x.

  2. Under your web browser, enter the URL: http://192.168.10.80 to access the PDU's local status page web interface.

  3. You can review the device status after logging into the Gateway with the default admin account/password (admin/admin).

  4. Check the information on the Device Status and take action if necessary.

Last updated