Option A: Cloud Management
Last updated
Last updated
Connect the Ethernet cable from the EnGenius Switch directly to the DHCP-enabled network and make sure the PDU can reach the Internet.
You can register the device either by Cloud To-Go mobile app or the EnGenius Cloud platform.
Open and log in to the EnGenius Cloud To-Go mobile app.
Scan the QR code on the back of the device via the app.
3. If the camera successfully scans a QR code, the app will display the Device Information. You could tap "Register" to complete the Registration.
4. Registered devices will be shown on the Inventory & License page. Upon sliding left the device, you can click "Add to Network" to add the device to your designated Network.
Go to the home > Inventory page and click "Register Device".
4. Select the registered device and click "Assign to Network" to add the device to your designated Network.
If your PDU device cannot be managed by the EnGenius Cloud Platform, there might be a problem with connecting to EnGenius Cloud.
To troubleshoot the connection issue, you may log in to the PDU Local Web (optionB) page:
Make sure that your host system has same layer-2 network as the PUD. By default, the computer should get the IP address in this segment 192.168.10.x.
Under your web browser, enter the URL: http://192.168.10.80 to access the PDU's local status page web interface.
You can review the device status after logging into the PDU with the default admin account/password (admin/admin).
Check the information on the Device Status and take action if necessary.
Log into the EnGenius Cloud Platform: .
Enter the Serial Number of the device(s) for device registration. Please refer to "".
