Powering EnGenius Fit AP
Powering the EnGenius Fit AP
EnGenius Fit AP devices can be powered by any of the following:
EnGenius Fit PoE switches or 802.3af/ 802.3at PoE+ compliant switches
EnGenius PoE adaptor (EPA5006GP/EPA5006GAT)
Power Adapter (12V/2A power input)
Caution: Do not use both power sources at the same time.
Connecting to a PoE Switch
Connect the Ethernet cable from the EnGenius Fit AP directly to the PoE port of the PoE switch.
Powering with a PoE Adapter
(A) Connect one end of the Ethernet cable into the LAN (PoE) port of EnGenius FIT AP and the other end to the PoE port on the PoE Adapter.
(B) Connect the power cord with the PoE Adapter and plug the other end into an electrical outlet. (C) Connect the second Ethernet cable into the LAN port of the PoE Adapter and the other end to the Ethernet port on the computer.
Please make sure to use cat5/cat5e UTP/STP RJ45 Ethernet cables.
Powering with a Power Adapter
Connect the Power Cord to the adapter, and then plug the Power Cord into the power outlet.
Last updated