Hardware Mounting

Hardware Mounting

The access point can be mounted on the Ceiling and Wall. Please perform the following steps to install successfully.

Ceiling Mount

- T-Rail

  1. Slide the Ceiling Mount Base into the designated slot on the access point slot of the Access Point.

2. Slightly hook the ceiling mount bracket onto the T-Rail until you hear a click.

- Hard Ceiling

  1. Screw the included Screws into the Ceiling Mount Base with Spacers, and then screw the Screws into the surface until they are flush with the surface.

2. Slide the Access Point into the Ceiling Mount Base.

Wall Mount

  1. Determine where the Access Point will be placed and mark the location on the surface for the two mounting holes. Use the appropriate drill bit to drill two 8.1mm diagram and 26mm-deep holes on the marks.

  2. Screw the Anchors into the holes until they are flush with the wall; screw the included Screws into the Anchors but leave the screw head sticking out so you can hang the Access Point on it.

3. Hang the Access Point against the wall onto the Screw heads.

Last updated