LogoLogo
  • Fit6 2x2 Outdoor
  • Hardware Mounting
  • Powering EnGenius Fit AP
  • Management Plane
  • Option A: Cloud Management
  • Option B: On-Premises Management
  • Option C: Standalone Configuration
  • Appendix
    • Technical Support
    • Security Bulletin
    • Compliance
    • Declaration of Conformity
    • Disclaimer/ Note
Powered by GitBook
On this page
  • Option C: Standalone Configuration
  • Step 1: Access to Local Web
  • Step2: Configure and Manage the Device
Export as PDF

Option C: Standalone Configuration

Last updated 2 years ago

Option C: Standalone Configuration

Step 1: Access to Local Web

  1. Use your client device (e.g., a laptop, mobile device, or tablet) to find the SSID: "EnMGMTxxxx" and connect to it.

EnMGMTxxxx - xxxx is the last four digits of MAC - MAC can be found on the device label on the back of the access point.

2. Under your web browser, enter the URL: or http://192.168.1.1 to access the device's user interface.

3. Use the default login credential (ID/PWD: admin/admin) to log in to the device's local web page.

Step2: Configure and Manage the Device

After logging into the device's local web page, navigate to the left side menu to configure and manage the AP accordingly.

How to Change Management Mode?

EnGenius Fit devices support versatile network management methods, but the device can only be managed under one management mode at a time - either FitXpress, FitController, or Standalone. Therefore, you need to reset the device before changing to a different management mode. Then follow QSG instructions for the device onboarding.

For information on configuring and using the Standalone Configuration, refer to the User Guide:

http://docs.engenius.ai/user-manual-FitController
http://EnGenius.local