Cloud7 2x2x2
Cloud Managed Wi-Fi 7 2x2x2 Indoor Access Point (ECW526)
Last updated
Cloud Managed Wi-Fi 7 2x2x2 Indoor Access Point (ECW526)
Last updated
This Quick Start Guide is designed to guide you through the installation of the Cloud7 2x2x2 Access Point, model ECW526, including hardware mounting and configuration.
Wi-Fi 7 technology for high-performance Wi-Fi in high-density, multi-device environments.
Supercharged speeds up to 5,800 Mbps on 6 GHz, 2,900 Mbps (5 GHz), and up to 700 Mbps (2.4 GHz).
10 GbE realizes greater throughput and supports 802.3at and 60W PoE injector input for flexible installation over 100 meters (328 feet).
The EnGenius Cloud is primarily accessible with a web browser or mobile app. Before signing up for the EnGenius Cloud Service or logging on to the EnGenius Cloud Platform to manage your network, ensure that downloaded the right app and use the supported browser.
EnGenius Cloud To-Go (iOS/ Android supported)
Google Chrome (57.0.2987.110 and later)
Microsoft Edge (80.0.361.103 and later)
Mozilla Firefox (52.0 and later)
Before you get started, please make sure your network environment is DHCP-enabled. EnGenius Cloud Access Points (ECW series) are default assigned an IP address dynamically by the DHCP server.
Reset to default: Press and hold the reset button for over 10 seconds, and the LED(PWR) will start Fast Flashing (0.2 sec). Then, the device will be reset to factory default settings.
The access point can be mounted on the Ceiling and Wall. Please perform the steps for the appropriate installation:
Use the outermost screw hole of the Bracket to mark the distance where the T-bar should be fixed on the T-rail.
Loosen the fixed screws on the T-bar with an L-wrench. Align the center screw hole of the T-bar with the position just marked on the T-rail, then tighten the fixed screws on the T-bar using the L-wrench.
Use the Short Screws from the accessory to fix the Bracket onto the T-bar.
Mount the Access Point on the Mounting Bracket by rotating the unit clockwise about 45 degrees to secure it in place.
1. Determine where the Access Point will be placed and attach the Mounting Bracket to the Wall/ Ceiling using the provided Mounting Kit.
2. Mount the Access Point on the Mounting Bracket by rotating the unit clockwise about 45 degrees to secure it in place.
You can register the device either by the Cloud To-Go mobile app or the EnGenius Cloud platform.
Open and log in to the EnGenius Cloud To-Go mobile app.
Scan the QR code on the back of the device via the app.
3. If the camera successfully scans a QR code, the app will display the device Information. You can tap "Register" to complete the Registration.
4. Registered devices will be shown on the Inventory&License page. Slide left the device and click "Add to Network". Add the device to your personalized Network.
Go to the home > Inventory&License page and click "Register Device".
4. Select the registered device and click "Assign to Network" to add the device to your personalized Network.
The EnGenius Cloud AP devices can be powered by any of the following:
EnGenius Cloud PoE Switch or 802.3af/ 802.3at PoE+ compliant Switch
EnGenius PoE adaptor (EPA5006GP/EPA5006GAT)
Power Adapter (DC 12V/2A power input)
Do not use both power sources at the same time.
Connect the Ethernet cable from the EnGenius Cloud AP directly to the PoE port of the PoE switch.
(A) Connect one end of the Ethernet cable into the LAN (PoE) port of EnGenius Cloud AP and the other end to the PoE port on the PoE Adapter.
(B) Connect the power cord with the PoE Adapter and plug the other end into an electrical outlet. (C) Connect the second Ethernet cable into the LAN port of the PoE Adapter and the other end to the Ethernet port on the computer.
Connect the Power Cord to the adapter, and then plug the Power Cord into the power outlet.
Once the device is powered on and ready to connect to the Internet, the LED indicator will stay Solid On, which means the device is now connected to the EnGenius Cloud Platform. It will automatically download the default configuration settings from EnGenius Cloud for automated provisioning.
When the Access Point is connected to the EnGenius Cloud Platform for the first time, it will automatically check the latest firmware version available. If the firmware upgrade is required, it might take 8-10 minutes to complete. The LED indicator will be Flashing (0.5 sec) untill the process is finished.
If the EnGenius Cloud Platform cannot manage your AP, there might be a problem with connecting to EnGenius Cloud.
To troubleshoot the connection issue, you may log in to the Device Local Access page:
Use your client device (e.g., a laptop, mobile device, or tablet) to find the SSID: "EnMGMTxxxx" (xxxx is the last four digits of MAC - MAC would be found on the back of the device) and connect to it.
You can review the device status after logging into the AP with the default admin account/password (admin/admin).
Check the information on Network Connectivity and take action if necessary.
If you encounter issues with IP address assignment, you may want to change your IP assignment from "DHCP mode" to "Static IP". Please check the "" for more details.
Log in to the EnGenius Cloud Platform: .
Enter the Serial Number of the device(s) for device registration. Please refer to "".
Log in to the platform to configure detailed settings. For more information, please refer to .
Under your web browser, enter the URL or http://192.168.1.1 to access the device's user interface.
For more details, please refer to the "".
