About Release Notes
Access Point Firmware
Support multiple domains of AD server.
Adjust DCS algorithm.
Recognize new iOS/MAC OS version.
Fixed captive portal for IPv6 issue.
Adjust log messages.
Fixed diag tool/Speed Test issue
Add configuration to accept RADIUS server's VLAN attribute or not.
Support wireless spectrum analysis.
Support DFS channel fallback scheme.
Support MAC-based authentication with RADIUS (OPEN).
WPA3-SAE and WAP3/WAP2 mixed mode support Dynamic Client VLAN Pooling.
Support DCS (Dynamic Channel Selection) by background scanning.
Enhance bcmc function that may block DHCP broadcast OFFER/ACK packets.
Support auto-channel with "Exclude DFS" config.
Support EnGenius cloud diagnostic mode.
Enclose fix for FragAttacks security issue.
Support system-reserved IP range pool.
Support RADIUS CoA disconnect-client requests.
Perform periodically scanning for 802.11k report without background scanning.
Support intelligent band-steering.
Support proxy ARP.
Support 802.1x/captive portal with Google Auth.
Support RADIUS WISPr traffic control and traffic quantity attributes.
Support RADIUS MAC-Auth in captive portal.
Support captive portal authentication by LDAP/AD server: single SSID, single server.
Update 2.4GHz HT20 auto-channel algorithm for using 1,6,11 channels.
Optimized wireless connectivity for 11AX models.
Fix target assert issue caused by iPhone11/iPhone12 for 802.11ax models.
Add log message for Wi-Fi reload event.
Add protection to prevent Wi-Fi interface could not be brought up.
Support Facebook Wi-Fi.
Add client's TX/RX Byte information in disassociation event log.
Modify LSP Page about HTTP/HTTPS proxy setting.
Handle HTTP error code 504 upon check-in to cloud server.
Handle private MAC address detection with blocked info messages.
Adjust mesh related syslog contents.
Support background scanning ON/OFF option.
Update certificate for HTTPS access to LSP page.
Remove unnecessary WLAN event logs.
Handle larger max. client limit value from cloud server.
Fixed the issue that LED on/off would trigger network reload with specific configurations.
Support MAC address authentication with RADIUS server.
Support MyPSK with RADIUS server authentication.
Handle VLAN ID attribute from RADIUS authentication responses.
Support SSDP responder and adjust mDNS response content.
Band Steering feature encloses improvement for 802.11k/v and utilizes 802.11r fasting roaming technique to avoid re-authentication upon connection to different radio band.
Procedures of applying WLAN configuration has been optimized to shorten needed time for setting update.
Enhance Captive Portal secure login with HTTPS-based information exchange.
Support my-PSK with dynamic VLAN for WPA2-PSK authentication. (only available from EnGenius Cloud, not external radius)
Mesh AP node supports traffic shaping.
Support SNMP v2/v3 for local management with Get function.
Support multicast to unicast per radio.
Captive Portal feature supports client-leave-network timeout.
Support Client Balancing to steer the client to connect to best available AP.
Support dynamic VLAN (VLAN Pooling).
Support Broadcast/Multicast suppression.
Adjust channel candidates of Auto-channel selection (ACS).
Adjust power table limitation of Malaysia and Indonesia.
Apply auto-channel selection mechanism update
Apply regulatory domain update
Adjust DTIM from 2 to 3
Adjust amsdu parameter from 7 to 3 for Wi-Fi 6 models
Turn Uplink OFDMA on by default for Wi-Fi 6 models