LogoLogo
  • CloudSwitch 8 PoE
  • Hardware Installation
  • Management Plane
  • Option A: Cloud Management
  • Option B: Standalone Configuration
  • Appendix
    • Technical Support
    • Compliance
    • Declaration of Conformity
    • Disclaimer/ Note
Powered by GitBook
On this page
  • Hardware Installation
  • Wall Mount
  • Power On Device
Export as PDF

Hardware Installation

Last updated 1 year ago

Hardware Installation

The ECS1008P can be mounted on the wall. Please perform the steps to install:

Wall Mount

  1. Determine where the Ethernet Switch will be placed and mark the location on the surface for the two mounting holes. Use the appropriate drill bit to drill two 8.1mm diagram and 26mm-deep holes on the marks.

  2. Screw the Anchors into the holes until they are flush with the wall; screw the included Screws into the Anchors but leave the screw head sticking out so you can hang the Ethernet Switch on it.

3. Place Ethernet Switch against the wall onto the Screw heads.

Power On Device

Connect the Power Adapter to the back of the Switch, and then plug the Power Cord into the power outlet.

*The display model number may be varied according to different models.