LogoLogo
  • CloudSwitch L2Plus 24
  • Hardware Installation
  • Management Plane
  • Option A: Cloud Management
  • Option B: Standalone Configuration
  • Appendix
    • Compliance
    • Declaration of Conformity
    • Disclaimer/ Note
    • Technical Support
Powered by GitBook
On this page
  • Option B: Standalone Configuration
  • Step 1: Access to Local Web
  • Step 2: Configure and Manage the Device
Export as PDF

Option B: Standalone Configuration

Last updated 6 months ago

Option B: Standalone Configuration

Step 1: Access to Local Web

  1. Connect your computer to the switch and ensure its IP address is in the same subnet.

2. Launch your web browser and enter the URL: http://192.168.0.239 to access the switch's local web GUI.

3. Use the default login credential (ID/PWD: admin/password) to log in to the switch's local web page.

Step 2: Configure and Manage the Device

After logging in to the device's local web page, navigate to the left-side menu to configure and manage the switch accordingly.

How to Change Management Mode?

EnGenius Cloud devices support versatile network management methods, but the device can only be managed under one management mode, either Cloud To-Go app or Standalone. Therefore, you need to reset the device before changing to a different management mode, followed by QSG instructions for onboarding the device.

For information on configuring the switch and using the Standalone Configuration, refer to the user guide:

https://docs.engenius.ai/ecs-user-manual
*The display model number may be varied according to different models.
*The display model number may be varied according to different models.