Hardware Mounting

Hardware Mounting

The access point can be mounted on the Wall and Pole, and please perform the steps for the appropriate installation:

Wall Mount

A) Plug the dynamic stick into the bracket.

B) Screw the sealing nut and assembled parts, as well as tighten it.

C) Put the nock washer on the dynamic stick.

D) Assemble the mounting parts to the device.

E) Determine the mounting location. Mark and drill two pilot holes aligning to the screw holes of the bracket.

F) Put wall anchors into the holes and insert screw into the wall anchor.

G) Screw and secure the bracket in place.

Pole Mount

A) Plug the dynamic stick into the bracket.

B) Screw the sealing nut and assembled parts, as well as tighten it.

C) Put the nock washer on the dynamic stick.

D) Assemble the mounting parts to the device.

E) Thread the open end of the pole strap through the two tabs on the bracket.

F) Lock and tighten pole strap to secure bracket to the pole.