Option B: On-premises Management

Option B: On-premises Management with FitController

Step 1: Connecting Ethernet

Connect the Ethernet cable from the EnGenius Fit Switch directly to the DHCP-enabled network, which is the same Layer-2 network as FitController.

Step 2: Log in to the FitController

Launch your web browser to access the login page of FitController. Enter the email and password that you created and click Sign In.

The FitController default IP address is in DHCP client mode to get an IP address from the DHCP server. If FitController cannot get an IP address from the DHCP server, The default IP address will be 192.168.1.250:8080.

Step 3: Register Device and Assign to Network

1. Go to the System > Inventory page and click "Register Device(+)."

2. FitController will list all EnGenius Fit devices discovered from the same L2 network in the Pending Approval section. Select the device and Click "Register" to add to inventory.

3. From the Inventory page, Select the newly added device and click "Assign to Network" to add the device to your personalized network.

*The display model number may be varied according to different models.

*The display model number may be varied according to different models.

Step 4: Pairing the Device

1. Go to switch Device List

2. Select the newly added device and click "Pairing" to adopt the access point to build an encrypted connection between the device and FitController.

*The display model number may be varied according to different models.

Step 5: Manage with the FitController

Navigate to the left site menu to configure and manage your network and view network statistics using the FitController management interface.

For information on configuring and using the FitController, refer to the user guide: https://docs.engenius.ai/fitcontroller-user-manual/