LogoLogo
  • FitSwitch 48 Full PoE
  • Hardware Installation
  • Management Plane
  • Option A: Cloud Management
  • Option B: On-premises Management
  • Option C: Standalone Configuration
  • Appendix
    • Technical Support
    • Compliance
    • Declaration of Conformity
    • Disclaimer/ Note
Powered by GitBook
On this page
  • Introduction
  • Package Contents
  • System Requirements
  • Web Browser:
  • Hardware Overview
  • Front Panel - Ports & Buttons
  • Front Panel - System & Ports LEDs
Export as PDF

FitSwitch 48 Full PoE

EnGenius Fit 48-Port Gigabit 740W PoE+ Switch with 4 SFP Ports (EWS7952FP-FIT)

Last updated 1 month ago

Introduction

This Quick Start Guide is designed to guide you through the installation of the FitSwitch 48 Full PoE, model EWS7952FP-FIT, including hardware installation and configuration.

FitSwitch 48 PoE

EnGenius Fit 48-Port Gigabit 740W PoE+ Switch with 4 SFP Ports

Model: EWS7952FP-FIT

  • 48 x 10/100/1000 Base-T GbE PoE+ Ports for a wide range of network devices such as WiFi APs, IP cameras, VoIP phones, and more.

  • 4 SFP slots for longer connectivity via fiber uplink

Content Quick Links

Package Contents

System Requirements

Web Browser:

  • Google Chrome (57.0.2987.110 and later)

  • Microsoft Edge (80.0.361.103 and later)

  • Mozilla Firefox (52.0 and later)

Hardware Overview

Front Panel - Ports & Buttons

  • Reset to default: Press and hold for over 10 seconds, and all ports LED will go off and on. Then the device will be reset to factory default settings.

  • Change LED display mode: Press the button to change the LED mode to display the PoE status of PoE-abled ports.

Front Panel - System & Ports LEDs

Hardware Installation
Management Plane
Option A: Cloud Management
Option B: On-Premises Management
Option C: Standalone Configuration
Page cover image