Option C: Standalone Configuration
Last updated
Last updated
Use your client device (e.g., a laptop, mobile device, or tablet) to find the SSID: "EnMGMTxxxx" and connect to it.
EnMGMTxxxx - xxxx is the last four digits of MAC - MAC can be found on the device label on the back of the access point.
2. Under your web browser, enter the URL: http://EnGenius.local or http://192.168.1.1 to access the device's user interface.
3. Use the default login credential (ID/PWD: admin/admin) to log in to the device's local web page.
After logging into the device's local web page, navigate to the left side menu to configure and manage the AP accordingly.
For information on configuring and using the Standalone Configuration, refer to the User Guide: http://docs.engenius.ai/user-manual-FitController
EnGenius Fit devices support versatile network management methods, but the device can only be managed under one management mode at a time - either FitXpress, FitController, or Standalone. Therefore, you need to reset the device before changing to a different management mode. Then follow QSG instructions for the device onboarding.
