LogoLogo
  • CloudSwitch L2Plus 8 Full PoE
  • Hardware Installation
  • Management Plane
  • Option A: Cloud Management
  • Option B: Standalone Configuration
  • Appendix
    • Compliance
    • Declaration of Conformity
    • Disclaimer/ Note
    • Technical Support
Powered by GitBook
On this page
  • Option B: Standalone Configuration
  • Step 1: Access to Local Web
  • Step 2: Configure and Manage the Device
Export as PDF

Option B: Standalone Configuration

Last updated 8 months ago

Option B: Standalone Configuration

Step 1: Access to Local Web

  1. Connect your computer to the switch and ensure its IP address is in the same subnet.

2. Launch your web browser and enter the URL: http://192.168.0.239 to access the switch's local web GUI.

3. Use the default login credential (ID/PWD: admin/password) to log in to the switch's local web page.

Step 2: Configure and Manage the Device

After logging in to the device's local web page, navigate to the left-side menu to configure and manage the switch accordingly.

For information on configuring the switch and using the Standalone Configuration, refer to the user guide: https://docs.engenius.ai/ecs-user-manual

How to Change Management Mode?

EnGenius Cloud devices support versatile network management methods, but the device can only be managed under one management mode, either Cloud To-Go app or Standalone. Therefore, you need to reset the device before changing to a different management mode, followed by QSG instructions for onboarding the device.

*The display model number may be varied according to different models.
*The display model number may be varied according to different models.