# Cloud Platform

## 2025/08/13

### \[New Features]

* Support LAN port disable settings for all wall-plate and in-wall APs, giving MSPs more flexibility when wired service is not required in MDU environments.
* Supports 240MHz bandwidth on 5GHz for Wi-Fi 7 devices, providing higher throughput advanced WiFi clients (USA only).
* Enlarge the maximum Scene Details description from 1,000 characters to 2,000 to improve the accuracy of image AI.
* Extend maximum SD-Alert quantuty to 20 to cover more user defined contextual actions in different user scenarios.
* Increase Cloud AI filter in Camera list, making it easier to find out which Cameras are running Cloud AI.
* Add QR code for WPA3 Personal authentication function, making WiFi WPA3 deployment easier and more user friendly.
* Change the Camera AI Search default range to Last 7 Days to improve response time. Users can extend the range to search older footage.

### \[Issue Fixed]

* Fix the issue where 320 MHz configurations and status are displayed on APs that do not support 320 MHz when mixed with supporting APs in the same network.
* Fixed an issue where the Series information of Cloud Lite devices incorrectly changed to Cloud when opening the device details page in device list.
* Fixed an issue where pre-configured LAN port settings on ECW215 were not correctly applied during the device’s first check-in.
* Fixed an issue where pagination did not function correctly on the Cloud Team Member page.
* Fixed an issue where the advanced DCS settings could not be configured in networks located in countries that support 6GHz radio.
* Fixed an issue where switching between different orgs or networks multiple times on the Team Member page sometimes caused all team members to display as having view-only authority, even if some had admin authority.
* Fixed the wrong image displayed in ECW220v3 details page.

## 2025/08/06

### \[New Features]

* If there aren't enough AI tokens for the latest image analysis, the token pool will enter a "borrowed token" state and stop accepting new analysis requests. When new tokens are added, the system will deduct the deficit.

### \[Issue Fixed]

* Add missing **Packet Capture** functon in the ECW520 Diag Tool.

## 2025/7/31

### \[New Features]

* Add Gateway v6plus/Xpass (Japan’s VNE) with IPv6 IPIP tunneling for optimized connectivity

## 2025/7/8

### \[New Features]

* Gateway supports CloudBrink to enable Zero Trust Network Access (ZTNA) for enhanced secure remote connectivity
* Gateway WAN1 supports MAP-E and DS-Lite, enabling IPv6 access in ISP networks using IPv4-based tunneling.
* Added IPv6 Ping/Traceroute on Gateway WAN1 for improved troubleshooting capabilities
* Optimized first-time MOT (Motion Object Tracking) data request for cameras to improve efficiency.
* Enhanced Camera API to support creating video share links, retrieving people/vehicle activity, and listing cameras, enabling easier integration, smarter monitoring, and streamlined device management.
* Added support for “00000Japan” SSID (Japan’s national emergency Wi-Fi network), enabling open Wi-Fi access during disasters to ensure public connectivity and emergency communication.
* AP supports Casting on LAN, allowing Wi-Fi clients to cast to LAN-connected devices even in Layer 2 isolated networks.
* AP supports SSID Suffix, automatically appends unique suffixes to a central SSID across APs, simplifying setup and VLAN assignment in hospitality and MDU networks.
* AP SmartCast has moved from Pro License to Basic License

### \[Issue Fixed]

* Fixed the issue by enforcing that 320 MHz can only be enabled when 802.11be is active, ensuring proper WiFi standard compliance

## 2025/7/3

### \[New Features]

* Displays the actual current channel and radio performance instead of the configured values on the AP details status page to make troubleshoot easier.

### \[Issue Fixed]

* Fixed an issue where entering numbers in the identity filter caused incorrect results in the wireless client list.

## 2025/6/26

### \[New Features]

* Channel specification updates based on regulatory changes in different countries
  * **Australia**: Added Channel 144
  * **New Zealand**: Added Channel 144
  * **Canada**: Removed Channels 120 / 124 / 128 and 5GHz EHT240Hz support
  * **Vietnam**: Added support for the 6GHz band
  * **USA**: Added support for 5GHz EHT 240 MHz
  * **Japan**: Added support for 6GHz EHT 320 MHz
  * **Indonesia:** To comply with **new regulations in Indonesia**, the output power for Band 4 has been updated from EIRP 23 dBm to EIRP 36 dBm.
* The Basic Feature Plan supports up to 20 admin accounts , increased from the previous limit of 10.

## 2025/6/17

### \[New Features]

* Support Switch-Lite series.
* Enhanced the device summary function on the MSP portal to simplify multi-tenant management for managed service providers.
* Added VLAN information to the wireless client list and the search bar in the MyPSK user list to simplify troubleshooting in MyPSK environments.
* Added online/offline sorting functionality to the device list, allowing quick identification of problematic devices for further action.
* Support original/corp/stretch display camera modes for 4:3 video source.
* Added safe configuration and rollback functionality for the ECC series to prevent management loss caused by improper configurations.
* Added support for minimum dwell time and maximum alert latency settings in the camera Cloud AI feature, allowing users to optimize AI token consumption for different scenarios.
* Supports Software-Defined Alerts (SD-Alert) for contextual AI surveillance events. Users are passively notified of critical events  and can quickly access the associated video footage without the need for routine checks.
* Added more options for video AI search, making it easier to locate target video footage.

### \[Issue Fixed]

* Fixed an issue where the network topology was not displayed correctly in the report.

## 2025/05/20

### \[Issue Fixed]

* Fixed allowlist/ blocklist entry limit issue (over 100) in Client Access Control for Basic plan.

## 2025/05/15

### \[Issue Fixed]

* Remove the incorrect placeholder indicating FQDN support in the L3 outbound firewall function under SSID settings, as FQDN is not actually supported.
* Fix the issue where the exported topology image becomes blurry when managing a large number of devices.
* Fix the missing toggles for enabling/disabling Camera AI and Cloud AI on the camera details settings page.

## 2025/05/08

### \[New Features]

* Support 4:3 video display option for liveview and videowall, allowing user to keep correct aspect ration.\
  **Device Firmware Requirement:**\
  ECC: v1.1.20 or above
* Support for the **Layer 3 outbound firewall** settings per SSID. Gives admins more control over wireless traffic to enhance network security.\
  **Device Firmware Requirement:**\
  ECW: v1.x.95 or above
* Add a "Cloud AI" indicator in the camera list to make it easier to check whether the video AI feature is enabled for each camera.
* Provide 120 minutes of free viewing time per month for cameras with only a basic license, and enhance the viewing counter to show users the remaining time.

### \[Issue Fixed]

* Fix where disabling Telnet via the local UI, it will be re-enabled by Cloud a few minutes later.

## 2025/04/08

### \[New Features]

* Support disconnect & logout AP clients in RESTful API, make it easier to integrate with 3rd party IdP/authentication service provider for Change of Authentication (CoA) requirements.\
  \
  **Device Firmware Requirement:**\
  ECW: v1.x.91 or above\
  ECW-Lite: v1.x.10 or above

### \[Issue Fixed]

* Fix the floorplan disappear issue when viewing floorplan and change network view to HV view in Org tree.

## 2025/03/06

* Support gateway device /firewall/traffic log record to syslog server. `Configure > General settings > EnableDevice/Firewall/Traffic log on gateway`
* Support realtime firewall log download for identifying problems and confirming that the rules are working as expected. This requires gateway firmware 1.2.70 or later versions.`Configure > Firewall > Enable syslog on outbound/port forwarding/1:1NAT firewall rules > Click Apply > Click Real-time logs`&#x20;

## 2025/02/18

* Support IP-Mac-port-binding to verify the correctness of network packets from authorized clients and forbid those packets that has been changed by hackers. `Configure > Client Access Control > IP-MAC-Port Binding, adding a switchs/ports that you'd like to do IMPB to`` `**`Protected Switch Port list`**`, and then add client to`` `**`IMPB Client List`**` ``to bind it to cooresponding port.`
* Support LLDP on gateways. `Configure > General Settings > Enable/Disable LLDP`

## 2025/01/07

* Support BaseDN option in Google LDAP  allows the server to know where to start searching for data and ensures that the search results include only the data within that specified range.  `CONFIGURE > Access Point > SSID > WPA2 / WPA3 enterprise / Captive portal > Google LDAP`&#x20;
* Support SAML for  using Azure AD and Microsoft Authticator for 2FA on Captive portal to enhancing your network security and user authentication process. `CONFIGURE > AP > SSID > Captive Portal > Azure AD > Select SAML > Upload the IdP Metadata File which provided by external Idp server.`
* Support Fast handover to configure RSSI threshold on each band  for a client to stay connected to the A&#x50;**.** This ensures that clients maintain stable and optimized connectivity. It required AP firware v1.x.82 or later   `CONFIGURE > Access Point > Radio Settings and adjust the Fast Handover settings. MANAGE > Access Point > AP List, select a specific AP, navigate to the Summary page, and access the FastHandover for that device.`                       &#x20;
* Support to a "Reset" action to restart the AutoReboot mechanism when the outlet has reached the maximum number of AutoReboot attempts `MANAGE > PDU > PDU List > Click Specific PDU > Detail > Timeout settings > click the reset on specific outlet.`



## 2024/11/26

* &#x20;Support DFS channel settings for both **indoor and outdoor APs** at the **network-wide** and individual device. `Configure > Radio Settings > AutoChannels > Select / deselect DFS Channel.` `Configure > AP Detail > Radios / Select DFS Channels on 5G`&#x20;

## 2024/10/22

* Layer 7 policy-based route is supported, so you can set the rules to direct specific applications to different WAN interfaces without specifying IP addresses or port ranges. `Configure > Gateway > Interface > Policy Route > Layer 7 > Add the rules`&#x20;
* Layer 7 firewall rules are supported, so you can block specific applications without specifying IP addresses or port ranges. `Configure > Gateway > Firewall > Outbound Rules > Lay 7 > Set the rules`&#x20;
* `Disable RTS /CTS is supported Configure > Access Points > Radio > Enable/Disable RTS/CTS on outdoor APS`

##

## 2024/08/08

* Network template is supported , so you can easily copy the current network configuration as the template and then apply to multiple networks in the same organization at the same time. `Organization > Backup & Restore > Configuration template > Add the network template > Click Apply then select the networks to be applied the network template configuration.`
* Firmware freeze is supported . `Configure > Firmware > Enable freeze firmware version > select the Beta/Stable version firmware to be frozen then click apply`
* Enable / Disable Https only and access control on local web pages `Configure > General settings> Network > Enable/Disable Https only and enable disable Local web pages.`

##

## 2024/6/20

* _AVXpress_ offers an end-to-end Quality of Service (QoS) solution specifically designed for crucial audio/video (AV) applications, including video conferencing, multi-media streaming, and gaming. It enables users to prioritize traffic based on its importance.   `Configure > SSID > Application control > Adjust the priority on audio/video (AV) applications`



* RadSec support for the RADIUS server allows you to exchange RADIUS authentication, authorization, and accounting messages through a secure TLS tunnel between the RADIUS server and the AP. It requires AP firmware version 1.x.81 or higher and the addition of a RadSec certificate for functionality. `Organization> Security > Certificates> Upload the certificate you get from the RADIUS server > Then go to Configure > AP > SSID > Wireless > WPA2/3 Enterprise/Captive portal > Custom RADIUS> Enable the RadSec on RADIUS Server.`



##

## 2024/4/30

* Beta version of the new dashboard has been released, so you can check the PDU device numbers, and power status, which include the PDU outlet and Switch PoE status. `Dashboard > click the view beta version on the top right corner > New dashboard is displayed with PDU devices numbers , Power status and clients.`
* Hotspot 2.0 is a standard for Wi-Fi roaming between Wi-Fi and cellular networks with automatic authentication. It required AP firmware 1.x.75 or above.  `Configure >SSID > Hotspot2.0 > Enable Hotspot 2.0 .`



## 2024/04/02

* Support Policy Route, you can route traffic over preferred network paths, prioritize certain types of traffic, or balance traffic across multiple links for load balancing and optimization purposes. `Configure > Gateway > Interface > Policy Route > Add Policy Rule`

##

## 2024/02/29

* Support PDU templates, so you can configure whole network PDUs at once with each PDU model template. `Configure > PDU > Template`
* When the outlet auto-reboots and the powered device is not powered successfully , we will notify users by default.



## 2024/01/31

* Auto Channel now allows you to pick the desired channel on Radio settings `Configure > Radio > select auto > click Change ch. > pick the channel.`
* Support allowlist on Client Access Control. `Configure > Client Access Control > Enter the mac address on allowlist.`
* Add MLO (Multi-Link Operation) options on each SSID. This allows Wi-fi 7 clients to create multiple links with different bands and transmit data concurrently. required AP firmware V1.x.70 or above on Wi-Fi 7 models.  `Configure > SSID > Wireless> Enable MLO.`
* Add DDNS for gateway passthrough mode. `Configure > Gateway > Interfaces > select passthrough mode > Choose DDNS providers you want and configure it`.&#x20;



## 2024/01/04

* &#x20;Wired Client will display the clients that are directly connected to the downlink port on switches. ECS1xxx/2xxx requires switch firmware v1.2.85 or above. ECS5xxx requires switch firmware v2.2.15 or above.`Manage > Client > Wired Client`
* SSID on LAN is supported on ECW115 and ECW215AP on LAN3 . `Configure > General settings > AP > select the SSID you want to bind on LAN3`
* Gateway detail page support Log page. `Manage > Gateway > Detail > Logs.`
* PDU & EXT supports photo as other product's detail page.



&#x20;          &#x20;

## 2023/11/30

* The Network can be dragged and dropped to different HV in the same Organization.                                           _`Click the menu icon on the left-top corner > drag the network and then move to different HV in the same organization.`_
* PD lifeguard and Autocam lifeguard are supported. PD lifeguard is a function that will automatically reboot PD devices when the PoE switch found it was not responding. Auto cam lifeguard is one of the options in PDLG auto mode. By enabling ACLG, the switch also considers Onvif discovery results to verify if the connected PD is a surveillance device or not. if yes, apply the ACLG reboot profile to the corresponding port automatically.`Manage > Switch > Details > PoE > PD lifeguard > Select Ports to enable PD lifeguard > Select Auto Mode > enable Autocam lifeguard.`
* Port Isolation Enhancement is supported, so you can configure the forward ports which can be separated into different groups where traffic between different group are blocked. `Manage > Switch > Details > Ports > Select Ports to enable Isolation and set forward ports.`
* MSP change log is supported. `Click MSP icon > Teams > Change log`

## 2023/10/19

* Topology view now can display PDU and Switch Extender. `Manage > Topology > you can see the PDU/ Switch Extender icon displayed if you have the devices.`
* MSP Single Sign-On (SSO) is now supported.
* BCMC is activated by default and available under the basic plan.               `Configure > SSID > Add SSID > Advanced settings> BCMC is enabled by default and no Pro license required`
* 802.11r now can be enabled when select WPA3 Personal (SAE) or WPA3-Personal/WPA2-PSK mixed.&#x20;
* Gateway WWAN offers a statistical chart  `Manage > Gateway Detail > Summary > WWAN statistics is displayed on Throughput/ Latency/Packet Loss.`
* VLAN Trunking is available for both Switch and Switch Extender                                        `Manage > Switch/Switch EXT details> Ports> Select the port you want to enable VLAN Trunking and Apply.`



## 2023/09/18

* The outlet schedule is able to set three enabled periods in one day on PDU firmware v1.0.5 or above.                                                                                                                                        `Manage > PDU > detail > Schedule > edit the outlet schedule > select time slider to be 3`&#x20;
* The outlet autoreboot is supported.                                                                                                                                                                                                                                    `Manage > PDU > detail > AutoReboot > Enable the AutoReboot on outlets and configure the hosts that you want to ping`
* SNMP v1/v2 is supported on PDU firmware v1.0.5 or above.                                                            `Configure > General settings > SNMP > change SNMP state to V1/V2c and set the community`
* Switch Extender-related settings are now available to configure if your inventory has the extender registered in your organization.&#x20;
* Gateway EnGenius DDNS is supported when you update the ESG firmware to v1.1.36 on ESG510 or 1.2.36 on ESG610/620.                                                                                     `Configure > Interface > WAN > DDNS > select the DDNS provider to EnGenius DDNS > hostname is displayed and able to edited.`
* Gateway PoE reset is supported                                                                                               `Hover on port on the Gateway Panel on detail page > Reset PoE`

## 2023/08/15

* PDU-related settings are now available to configure if your inventory has the PDU registered in your organization.
* MSP features include creating MSP teams, Inventory device management across Organizations, and cloning organizations.
* Support Failover Preference for adjusting the preferred secondary WAN interface. &#x20;
* Support Per client application analysis `Manage > Client > click the client name > Application Analysis`
* Support bandwidth limit on Gateway LAN Interface. `Configure > Gateway > Interface > LAN > adjust the download / Upload limit on Bandwidth limit tab.`



## 2023/07/17

* Multiple Bridge is supported on the gateway, This allows you to create Multiple untagged subnet environments. `Manage > Gateway > Interfaces > LAN > Change to Multiple bridge mode> Create other interfaces and set the interface type to Bridge`&#x20;



## 2023/07/07

* Export “Outbound firewall rules” and “Port Forwarding rules” in CSV format.                  `Configure > Gateway > Firewall > Outbound Rules/Port forwarding > Click on the Export button` &#x20;

## 2023/05/05

* Multi-language is supported.                                                                                                                                       `Click on the account located in the upper-right corner of the GUI > Languages > select the language (Chinese, Japan, Indonesia, German, Italy, or Netherlands)`



## 2023/04/28

* Containment could prevent clients to connect to rogue APs listed in the Rogue lists.                                            `Manage > AirGuard > Contain all rogue devices.`  This is available on AP 1.x.55  on "S" models.
* Contain selected APs only                                                                                                       `Manage >AirGuard > Rogue SSIDs > Expand the Rogue SSID to see all rogue AP’s detected > Choose the ones to be contained.` This is available on AP 1.x.55  on "S" models.
* &#x20;Mail notification option for firmware upgrades is supported. If enabled, users will receive email notifications if there will be firmware upgrade happened.                                                 `Configure > Alert > enable notification of firmware upgrade`

## 2023/01/31

* Support the option to disable NAT traversal in Site-To-Site VPN. `Configure > Gateway > Site to Site VPN > Disable the NAT traversal`
* Site-To-Site VPN can be enabled under WAN passthrough mode.
* Support the option to apply outbound firewall rules to all ESGs under the same Org. `Configure > Gateway > Firewall > Click the " Apply to all ESG in the org > Click Apply`
* Support real-time VPN status under the Gateway Pro feature plan. `Manage > VPN Status > VPN nodes > EnGenius Peers or Non-EnGenius Peers > Last Update : Realtime`

## 2022/12/26

*   Azure AD supported`Configure > SSID > Click on one SSID > Captive Portal > Authentication Type > Azure AD`

    `Configure > SSID > Click on one SSID > Wireless > WPA2/3 Enterprise > Azure AD`

## 2022/12/19

* PoE Extended mode is supported `Manage < Switches > Details > Ports > select the Ports > click Configure > find the speed/duplex settings > select Extended.`&#x20;

## 2022/12/7

* Support Import/Export VLAN with JSON file, so you can import VLAN settings at a time.`Manage> Switches > Detail > VLAN > export the JSON file > adjust the VLAN settings> import the JSON file.`                                                                      `Configure> Switches > Template > click one of the template > VLAN > export the JSON file > adjust the VLAN settings> import the JSON file.`

## 2022/11/14

* Wi-Fi calling service allows cellular users to make or receive calls using a Wi-Fi network instead of using the cellular network of the carrier, This is available on AP 1.X.50 or later version. `Configure > General Settings > AP > Enable WiFi calling.`

## 2022/5/25

* We provide **Base DN** allows you to specify the LDAP domain and type the LDAP **login attribute** to use for authentication. `Configure > SSID > Click on one SSID > Captive portal > My LDAP Server > Specify the baseDN (format:`` `**`dc=example,dc=com) and the login attrubute.`**

## 2022/5/12

* We provide “Fail-over” when 1st Radius is not reachable, 2nd or 3rd Radius will be used. However, some conditions might need to have “**Load balance”** on the Radius servers due to a very large client list to do authentication.   `SSID > Captive Portal > Custom Radius > 3 Radius servers allowed > enable Radius Load balance`

## 2022/4/29

* SmartCast SSID allows users to stream their subscribed media to the TV through Chromecast in their room. This feature requires AP firmware V1.x.37 for ac models and v1.x.45 for ax models  `Configure > SSID > Create a SmartCast SSID and enable mDNS forwarding for all other SSIDs >add Chromecast to the lists > Download the QR code of the Chromecast and then install it on the corresponding Chromecast device > Scan QR-code`
* Support RADIUS VLAN override `SSID > WPA2/3 enterprise > VLAN by RADIUS`&#x20;
* Support Hidden SSID detection  `Manage > AirGuard > Rogure SSID`

## 2022/4/12

* Support Packet Capture with Switch firmware 1.2.61 or above.                                                                      `Manage > Switches > Detail > click Diag icon > Packet Capture`                                                                  `Manage > Switches > Diag > Packet Capture`&#x20;
* Allow users to reset the authenticator’s certificate to default on Google LDAP.                       `SSID > WPA2/3 enterprise > Google LDAP`                                                                      `SSID > Captive Portal > Authentication Type > Google LDAP`
* Support Advanced DCS settings.  So you can schedule DCS by start time or time interval.                                                                                        `Configure > Radio settings > DCS > Advanced settings`

## 2022/3/31

Diag tool is supported on switch firmware 1.2.60 or above. So you can use it to troubleshoot errors. `Manage > Switches > Diag`

`Manage > Switches > Detail> click Diag icon`

## 2022/3/2

&#x20;6G is supported by the country.

&#x20;`Configure > SSID > Click one SSID > Wireless > Enable 6G`.

&#x20;`Configure > Radio Settings > Enable 6G`&#x20;

## 2022/1/18

DuraFon Roam management page is supported. `Click the phone icon on the left panel`.&#x20;

## 2021/12/8

Diag tool is supported on AP firmware 1.x.35 or above. So you can use it to troubleshoot errors.&#x20;

`Manage > Access Ponts > Diag`

`Manage > Access Ponts > Detail>click Diag icon`

Clear all logs on Organization is supported. `Notification > click clear icon near the Organization`

## 2021/12/1

Per device licensing added. We provide 1 year of free PRO licensing, so you can use PRO features. After 1 year, if you want to use the PRO feature, each device needs to assign a license.&#x20;

`Organization > Inventory & Licensing`  &#x20;

## 2021/11/9

* Dynamic Channel Selection supported.  This will automatically change channels to avoid interference `Configure > Radio settings > DCS > Enable DCS`   &#x20;
* Exclude DFS supported. This allows you to exclude DFS channels from Auto Channel on 5G                                                                                              `Configure > Radio settings > Exclude DFS > Enable Exclude DCS`                                                                                &#x20;

## 2021/10/19

*   New Firmware Trial Zone Supported.&#x20;

    Users can pick devices into New Firmware Trial Zone, so you can try the new Firmware on partial network devices and prevent the whole Network from going wrong. &#x20;

    `Configure > Firware Upgrade > New Firmware Trial Zone > Add devices into Trial Zone`&#x20;



## 2021/09/02

*   AD/ LDAP supported (only 1 SSID can be enabled in a network)

    `Configure > SSID > Click on one SSID > Captive Portal > Authentication Type > My LDAP Server or Active directory`&#x20;

    `Configure > SSID > Click on one SSID > Wireless > WPA2 Enterprise > Security > My LDAP Server or Active directory`
*   Support Bandwidth limit by RADIUS and RADIUS MAC Auth &#x20;

    `Configure > SSID > Click on one SSID > Captive portal > Custom RADIUS`

## 2021/08/24

* Support Virtual AP on floor plans. This allows users to plan the Wi-Fi environment even if physical AP hasn't been registered. Once users have physical APs in the network, users can drag the physical AP to Virtual AP ( model needs to be the same) then physical AP could use the Virtual AP configuration. `Manage > Map & Floor Plans > click Virtual AP icon on the tool bar > add the virtual AP then drag on the floor plan > adjust the Virtual AP configuration` &#x20;
* Support to use polyline to draw an obstacle. `Manage > Map & Floor Plans > Obstacle`



## 2021/07/14   &#x20;

* Support Google LDAP.                                                                                                                                            If users have used  Google Suite, then the users are able to choose google LDAP as their service. If users import Google Certificates from the EnGenius cloud then users can return to the Google Suite to manage the LDAP service.                                                                                       `SSID > WPA2/3 enterprise > Google LDAP` `SSID > Captive Portal > Authentication Type > Google LDAP`
* Support System IP Range.                                                                                                                                                     Let users be aware of the EnGenius reserved IP range to prevent them from using it in their local LAN. and be able to change the System reserved range if they cannot change their local LAN IP address range. `Configure > General settings > AP`&#x20;
* Support RADIUS CoA (Change of Authorization). This allows a RADIUS server to change the access authorization of an active client session. `Configure > SSID > click on one SSID > Captive Portal > Custom Radius > CoA`&#x20;

\
&#x20;2021/5/19
---------------

* Support switch template.                                                                                                                                  This helps users to apply the same port configuration to all switches with the same models in the Network to save the time of configuration. `Configure > Switch settings > Template`
*   Support WIFI usage in Client Timeline.

    `Manage > Clients > then click on one client`.

## 2021/4/12:

* Support exporting client list to CSV. `Manage > Clients > Export > CSV`
* Support SNMP in  `Configure > General settings > Network`
* Support network configuration backup/restore. `Organization  > Backup & Restore > Add a Network Backup with device backup` &#x20;

## 2021/3/17

* Support Report Generation. `Report > Task > New Task`
* Support Facebook WiFi `Configure > SSID > click on one SSID > Captive Portal > Facebook Wi-Fi`
* Support WPA2-MyPSK Auth with External RADIUS  `SSID > WPA2-PSK> WP2-MyPSK > Auth with external RADIUS`

## 2021/2/25

* `On Manage > Switch> Detail` page, add a `LED Blinking` button to trigger an AP to blink its LED for 10 seconds. This could help users quickly identify the AP.
* Support multicast and unicast `General Settings > AP >  Advanced Settings.`
* Support Switch POE Scheduling  `Manage > Switches > Detail > PoE Sched.`



## 2021/1/14

* Support WPA2-MyPSK. `SSID > WPA2-PSK> WP2-MyPSK`
* Support BCMC Suppression. `SSID > Wireless > Advanced Settings`&#x20;
* Support Org License so you are able to try the Pro feature easily.        `Organization > Inventory & License > Click on Switch to Professional`                                                                  &#x20;



## 2020/10/19

* Support mesh topology and show third-party devices.  `Manage > Topology`&#x20;
* Support NAS ID in custom RADIUS settings.  `SSID > click one SSID > Captive Portal > Custom RADIUS`                                                                                                                 &#x20;

## 2020/9/23

* Support VIP in ACL Settings.                                             `Configure > Access Control > VIP > Add VIP`&#x20;

## 2020-08-26

* Support the option to enable/disable switch local GUI in individual settings.
  * Go to `Switch detail page > System Settings > Local GUI (enable / disable)`
  * By default: Disabled, to prevent confusion on the settings from Cloud and Local GUI.
  * If the user wants to set some advanced settings which Cloud doesn’t support yet, then the user can enable the Local GUI
* Support both "Per Client" bandwidth limit and "Per SSID" bandwidth limit
  * `SSID > Bandwidth Limit > Enable "Per Client" and or "Per SSID" bandwidth limit > Upload / Download limit`

## 2020-07-09

* For Covid-19 infection control, **Exposure Analysis,** an extension of the Client Timeline, helps the Company to be able to identify who had been exposed to the infected in past days. `Manage > Clients > click on one client to go to Client Timeline > Exposure Analysis` (Exposure Analysis is by default disabled, go to below to enable: `Organization > Privacy > Enable Exposure Analysis`

## 2020-06-12

* Bulk voucher list can be exported to .csv file `Go to Voucher portal > user credential > auto generation > generate guest pass * N > create bulk voucher > Export to csv`

## 2020-06-01

* TFA (Two Factor Authentication) is enabled for Cloud users
* Enable TFA of your own: `User profile > Two Factor Authentication > install Google Authentication on mobile phone > enter TFA (or 2FA) code on Google Authentication APP > Activate`&#x20;
* or to enforce TFA (2FA) for all users in Organization O`rganization > Security > Enable 2FA Enforcement`
* Client's name can be renamed

## 2020-05-07

* **Block** function enables admin to block clients from access the networks, and the blocked-user will get blocked message. `Manage > Clients > choose the clients to be blocked > Access Control > Block on SSID / Blocked on Network-wide`
* Add **DNS** setting under **NAT** mode, so user can add, say, content filtering service to filter content access of NAT clients. `Manage > SSID > choose one SSID > Network > Client IP mode > NAT mode enabled > DNS settings`

## 2020-04-27

* **Splash page editor** is enhanced to "**WYSWYG**" style for user to define their own Logo and theme. `Configure > SSID > click on one SSID > Splash Page > Local Splash Page`
* **Global credential** setting is now available to assign single credential to all AP and Switch in the Network for local access. `Configure > General Settings > Network > Local Credential`
* "**Mirror**" and "**Link Aggregation**" function is enabled in Switch `Manage > Switches > click on one Switch >under Switch Device Local Page > Mirror / Link Aggregation`

## 2020-04-08

* **Client Timeline** is available to track how client access to the network for easy-to-debug `Manage > Clients >` then click on one client
* **Dark mode** supported

## 2020-03-10

* User can block clients in **Client List**.
* Support ACL Block List in **`SSID > Access Control`**
* Support WYSIWYG Splash Page editor.
* Add a “Clone From” button in **SSID Setting** page to speed up SSID manipulation by coping settings from other SSID.
* TX Power tuning options now start from 1 to 10 dBm.
* Support network-wide LED setting in **`General Settings > AP`**.
* Support LAN Port settings in **`General Settings > AP`** for wall-mounted Access Points.
* For 3rd party presence analytics or location-aware services, EnGenius Cloud now supports Presence Reporting settings i&#x6E;**`General Settings > AP`** for integration in advance.
* Syslog Server settings have been moved to **`General Settings`** under AP and Switch Tab.
* Support Traffic Log to have AP sending more traffic info to syslog server. The feature is available in advanced settings of **`General Settings > AP`**.
* In **Firmware Upgrade** page, clicking “Upgrade Now” button now also displays a summary of upgraded device number.
* User can see logs of a Switch in **`Switch List > Detail > Logs`**.
* Topology now automatically displays the port numbers when mouse is hovering the device icon.

## 2020-01-09

* Support WPA3.
* Support 802.11w.
* In **`AP List > Detail`** page, add **`LED Blinking`** button to trigger an AP to blink its LED for 10 seconds. This could help user to quickly identify the AP.
* User now can create and print vouchers in batch.
* **`Client List`** now shows more details about client IP address and vendor info.
* New EMail Alert format. Instead of sending all details in one mail, mail body now mainly contains the summary of managed networks. User can follow the link in the mail to browse details in advance.

## 2019-12-05

* Add "Global Settings" in Toolbar menu to support more network-wide configurations.
* In "Global Settings", user can configure network-wide "Local Credential" to make all managed APs with the same username and password for local access.
* Support the option to turn on/off LEDs of all managed APs in **`Global Settings > AP`**.
* Add "VLAN Settings" in Toolbar menu to let user centrally manage all VLANs defined or used in the Network. If there is any VLAN binding with SSID or Voice VLAN defined in switch, all these VLANs would listed in the **`VLAN Settings`** page.
* In **`Switch List > Detail > Summary`**, user can view all VLANs applied on dedicated switch (including VoiceVLAN).

## 2019-11-05

* Support network-wide **`Switch Settings`** for spanning tree, LLDP, voice VLAN, QoS, IGMP snooping, and jumbo frames.
* Support network-wide **`VLAN Settings`**. You can have an overview of the VLANs used in your network including SSIDs or Voice VLANs.
* In the switch detail page, you can manually configure IP Address settings of the switch. Note that the settings only work for the firmware version after 1.1.16.
* In the switch detail page, VLAN can be directly manipulated here. Any newly created VLAN will be also shown in the network-wide VLAN Settings.

## 2019-10-03

### New Features

* Client List now supports sophisticated search options.
* New Sign-In, Sign-Up pages is online.
* Have a dedicated button on the toolbar to manage team members intuitively.
* Add a **`Help`** icon button at top right corner of menu bar. User can access user manual and get support ticket over there.
* Support **`Delete My Account`** in the user setting menu.
* User can rename Skykey on the management page.

## 2019-09-25

### New Features

* Network-wide Radio Settings now support Indoor and Outdoor profiles.
* Support an option "Disable 11ax in 2.4G" in the Radio Setting. Some legacy wireless clients are not compatible with 11ax. Enabling this option makes the 11ax APs like ECW220 or ECW230 can still serve legacy client well in 2.4G channel.
* Users can upload and display photos in AP Detail page of Web GUI now.
