1 of 1

FitSwitch 8 PoE

EnGenius Fit Gigabit 8-Port 55W PoE+ Switch with 2 SFP Ports (EWS2910P-FIT)

Introduction

This Quick Start Guide is designed to guide you through the installation of the FitSwitch 8 PoE, model EWS2910P-FIT, including hardware installation and configuration.

FitSwitch 8 PoE

EnGenius Fit Gigabit 8-Port 55W PoE+ Switch with 2 SFP Ports

Model: EWS2910P-FIT

8 x PoE (802.3af/at) ports to unleash elevated speeds for NAS, workstations, or WiFi APs
2 SFP slots for longer connectivity via fiber uplink

Content Quick Links

Hardware Installation

Management Plane

Option A: Cloud Management

Option B: On-Premises Management

Option C: Standalone Configuration

Package Contents

System Requirements

Web Browser:

Google Chrome (57.0.2987.110 and later)
Microsoft Edge (80.0.361.103 and later)
Mozilla Firefox (52.0 and later)

Hardware Overview

Front Panel - Ports & Buttons

Reset to default: Press and hold for over 10 seconds, and all ports LED will go off and on. Then the device will be reset to factory default settings.
Change LED display mode: Press the button to change the LED mode to display the PoE status of PoE-abled ports.

Front Panel - System & Ports LEDs

FitSwitch 8 PoE

EnGenius Fit Gigabit 8-Port 55W PoE+ Switch with 2 SFP Ports (EWS2910P-FIT)

Introduction

This Quick Start Guide is designed to guide you through the installation of the FitSwitch 8 PoE, model EWS2910P-FIT, including hardware installation and configuration.

FitSwitch 8 PoE

EnGenius Fit Gigabit 8-Port 55W PoE+ Switch with 2 SFP Ports

Model: EWS2910P-FIT

8 x PoE (802.3af/at) ports to unleash elevated speeds for NAS, workstations, or WiFi APs
2 SFP slots for longer connectivity via fiber uplink

Content Quick Links

Hardware Installation

Management Plane

Option A: Cloud Management

Option B: On-Premises Management

Option C: Standalone Configuration

Package Contents

System Requirements

Web Browser:

Google Chrome (57.0.2987.110 and later)
Microsoft Edge (80.0.361.103 and later)
Mozilla Firefox (52.0 and later)

Hardware Overview

Front Panel - Ports & Buttons

Reset to default: Press and hold for over 10 seconds, and all ports LED will go off and on. Then the device will be reset to factory default settings.
Change LED display mode: Press the button to change the LED mode to display the PoE status of PoE-abled ports.