The access point can be mounted on the Ceiling and Wall. Please perform the following steps to install successfully.
Slide the Ceiling Mount Base into the designated slot on the access point slot of the Access Point.
2. Slightly hook the ceiling mount bracket onto the T-Rail until you hear a click.
Screw the included Screws into the Ceiling Mount Base with Spacers, and then screw the Screws into the surface until they are flush with the surface.
2. Slide the Access Point into the Ceiling Mount Base.
Determine where the Access Point will be placed and mark the location on the surface for the two mounting holes of the 15/16” T-Rail Ceiling Mount Base. Use the appropriate drill bit to drill two 8.1mm diagram and 26mm-deep holes on the marks.
Screw the Anchors into the holes until they are flush with the wall; screw the included Screws into the Ceiling Mount Base with Spacers, and then screw the Screws into the Anchors until they are flush with the Anchors.
3. Slide the Access Point into the Ceiling Mount Base.
