Send a ping request to a specified IPv6 address. Check whether the switch can communicate with a particular network host before testing.
You can vary the test parameters by entering the data in the appropriate boxes. To verify accuracy of the test, it is recommended that you run multiple tests in case of a test fault or user error.
Click Test to perform the ping test.
Items
Descriptions
IP Address
Enter the IPv6 address or the host name of the station you want the switch to ping to.
Count
Enter the number of pings to send. The range is from 1 to 5 and the default is 4.
Interval
Enter the number of seconds between pings sent. The range is from 1 to 5 and the default is 1.
Size
Enter the size of ping packet to send. The range is from 8 to 5120 and the default is 56.
Result
Displays the ping test results.