Allows IPv6 Based Access Control Entry (ACE) to be defined within a configured ACL.
Click Apply to update the system settings.
Items
Descriptions
ACL Name
Select the ACL from the list.
Sequence
Enter the sequence number which signifies the order of the specified ACL relative to other ACLs assigned to the selected interface. The valid range is from 1 to 2147483647, 1 being processed first.
Action
Select what action to take if a packet matches the criteria.
Permit: Forward packets that meet the ACL criteria.
Deny: Drops packets that meet the ACL criteria.
Protocol
Select the Any, Protocol ID, or Select from List from drop-down menu.
Protocol ID: Enter the protocol in the ACE to which the packet is matched.
Select from List: Select the protocol from the list in the provided field.
Source IP Address Value
Enter the source IP address.
Source IP Prefix Length
Enter the prefix length of the new source IP address. The range is from 0 to 128.
Destination IP Address Value
Enter the destination IP address.
Destination IP Prefix Length
Enter the prefix length of the new source IP address. The range is from 0 to 128.
Source Port
Select Single or Range from the list. Enter the source port that is matched to packets. The range is from 0 to 65535.
Destination Port
Select Single or Range from the list. Enter the destination port that is matched to packets. The range is from 0 to 65535.
TCP Flags
Select whether to handle each six TCP control flags; URG (Urgent), ACK (Acknowledgment), PSH (Push), RST (Reset), SYN (Synchronize), and FIN (Fin) from drop-down menu.
Don't Care: The ACE does not treat the TCP control flag.
Set: The packet with the TCP control flag being set matches the criteria.
Unset: The packet with the TCP control flag being unset matches the criteria.
Type of Service
Select Any or DSCP to match from drop-down list. When DSCP to match is selected, enter the DSCP. The range is from 0 to 63.