Enhance your Voice over IP (VoIP) service by configuring ports to carry IP voice traffic from IP phones on a specific VLAN. Voice VLAN provides QoS to VoIP, ensuring that the quality of the call does not deteriorate if the IP traffic is received erratically or unevenly.
Click Apply to update the system settings.
The switches determine whether a received packet is a voice packet by checking its source MAC address. VoIP traffic has a pre-configured Organizationally Unique Identifiers (OUI) prefix in the source MAC address. You can manually add specific manufacturer's MAC addresses and description to the OUI table. All traffic received on the Voice VLAN ports from the specific IP phone with a listed OUI is forwarded on the voice VLAN.
Enhance your VoIP service further by configuring ports to carry IP voice traffic from IP phones on a specific VLAN. Voice VLAN provides QoS to VoIP, ensuring that the quality of voice does not deteriorate if the IP traffic is received unevenly.
Click Apply to update the system settings.
To configure the OUI settings, click the Edit button to re-configure the specific entry. Click the Delete button to remove the specific entry and click the Add button to create a new OUI entry. Click the Apply button to accept the changes or the Cancel button to discard them.
Items
Descriptions
Voice VLAN State
Select Enabled or Disabled for Voice VLAN on the switch.
Voice VLAN ID
Sets the Voice VLAN ID for the network. Only one Voice VLAN is supported on the switch.
802.1p Remark
Enable this function to have outgoing voice traffic to be marked with the selected CoS value.
Remark CoS/802.1p
Defines a service priority for traffic on the Voice VLAN. The priority of any received VoIP packet is overwritten with the new priority when the Voice VLAN feature is active on a port. (Range: 0 to 7; Default: 6)
Aging Time
The aging time is used to remove a port from voice VLAN if the port is an automatic VLAN member. When the last voice device stops sending traffic and the MAC address of this voice device is aged out, the voice VLAN aging timer will be started. The port will be removed from the voice VLAN after expiration of the voice VLAN aging timer. If the voice traffic resumes during the aging time, the aging timer will be reset and stop. The range for aging time is from 1 to 65535 minutes. The default is 1440 minutes.
Items
Descriptions
Index
Displays the VoIP sequence ID.
OUI Address
Globally unique ID assigned to a vendor by the IEEE to identify VoIP equipment.
Description
Displays the ID of the VoIP equipment vendor.
Port
Displays the port to which the voice VLAN settings are applied.
State
Select Enabled to enhance VoIP quality on the selected port. The default is Disabled.
CoS Mode
Select Src or All from the list.
Src: Src QoS attributes are applied to packets with OUIs in the source MAC address.
All: All QoS attributes are applied to packets that are classified to the Voice VLAN.
Operate Status
Displays the operating status for the Voice VLAN on the selected port.
A virtual LAN (VLAN) is a group of ports that form a logical Ethernet segment on a Layer 2 switch which provides better administration, security, and management of multicast traffic. A VLAN is a network topology configured according to a logical scheme rather than a physical layout. When you use a VLAN, users can be grouped by logical function instead of physical location. All ports that frequently communicate with each other are assigned to the same VLAN, regardless of where they are physically on the network. VLANs let you logically segment your network into different broadcast domains so that you can group ports with related functions into their own separate, logical LAN segments on the same switch. This allows broadcast packets to be forwarded only between ports within the VLAN which can avoid broadcast packets being sent to all the ports on a single switch. A VLAN also increases network performance by limiting broadcasts to a smaller and more manageable logical broadcast domain. VLANs also improve security by limiting traffic to specific broadcast domains.
Each VLAN in a network has an associated VLAN ID, which appears in the IEEE 802.1Q tag in the Layer 2 header of packets transmitted on a VLAN. The IEEE 802.1Q specification establishes a standard method for tagging Ethernet frames with VLAN membership information. The key for IEEE 802.1Q to perform its functions is in its tags. 802.1Q-compliant switch ports can be configured to transmit tagged or untagged frames. A tag field containing VLAN information can be inserted into an Ethernet frame. When using 802.1Q VLAN configuration, you configure ports to be a part of a VLAN group. When a port receives data tagged for a VLAN group, the data is discarded unless the port is a member of the VLAN group.
NOTE: The switch's default setting is to assign all ports to a single 802.1Q VLAN(VID 1). Please keep this in mind when configuring the VLAN settings for the switch.
Enabled
Enables 802.1Q VLANs. This feature is enabled by default.
VID
Displays the VLAN ID for which the network policy is defined. The range of the VLAN ID is from 1 to 4094.
Name
Enter the VLAN name. You can use up to 32 alphanumeric characters.
Tagged Port
Frames transmitted from this port are tagged with the VLAN ID.
Untagged Port
Frames transmitted from this port are untagged
When an untagged packet enters a switch port, the PVID (Port VLAN ID) will be attached to the untagged packet and forward frames to a VLAN specified VID part of the PVID. A packet received on a given port would be assigned that port's PVID and then be forwarded to the port that corresponded to the packet's destination address. If the PVID of the port that received the packet is different from the PVID of the port that is to transmit the packet, the switch will drop the packet. Within the switch, different PVIDs mean different VLANs, so VLAN identification based upon the PVIDs cannot create VLANs that extend outside a given switch. If no VLANs are defined on the switch, all ports are then assigned to a default VLAN with a PVID equal to 1.
NOTE
To enable PVID functionality, the following requirements must be met:
All ports must have a defined PVID.
If no other value is specified, the default VLAN PVID is used.
If you wish to change the port's default PVID, you must first create a VLAN that includes the port as a member.
Click Apply to update the system settings.
Port
Displays the VLAN ID to which the PVID tag is assigned. Configure the PVID to assign untagged or tagged frames received on the selected port.
PVID
Enter the PVID value. The range is from 1 to 4094.
Accept Type
Select Tagged Only and Untagged Only from the list.
Tagged Only: The port discards any untagged frames it receives. The port only accepts tagged frames.
Untagged Only: Only untagged frames received on the port are accepted.
All: The port accepts both tagged and untagged frames.
Ingress Filtering
Specify how you wish the port to handle tagged frames. Select Enabled or Disabled from the list.
Enabled: Tagged frames are discarded if VID does not match the PVID of the port.
Disabled: All frames are forwarded in accordance with the IEEE 802.1Q VLAN.
